父子CHINESE帅哥互C网站,国产A∨精品一区二区三区仙踪林亚洲中文字幕永久在线全国 ,亚洲精品一级黄片

ZHCSEK7D June 2015 – May 2021 LM53600-Q1 , LM53601-Q1

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

DSX|10
- MPDS565C

散熱焊盤機械數據 (封裝 | 引腳)

DSX|10
- QFND662

訂購信息

7.6 System Characteristics

The following specifications are ensured by design provided that the component values in the typical application circuit are used. These parameters are not ensured by production testing. Limits apply to the recommended operating junction temperature range of –40°C to 150°C, unless otherwise noted. Minimum and Maximum limits are ensured through test, design or statistical correlation. Typical values represent the most likely parametric norm at Tj = 25°C, and are provided for reference purposes only. Unless otherwise stated the following conditions apply: Vin = 13.5 V.

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
V_{in_min}	Minimum input voltage for full functionality at 500-mA load, after start-up	V_OUT = 3.3 V			3.55	V
	Minimum input voltage for full functionality at 100% of max rated load, after start-up	V_OUT = 3.3 V			3.8	V
V_{out_3_3V}	Output voltage for 3.3-V option	V_IN = 4.0 V to 36 V, I_OUT = Maximum recommended load current	3.23	3.3	3.37	V
V_{out_3_3V}	Output voltage for 3.3-V option	V_IN = 3.8 V to 36 V, I_OUT=100 μA to 100 mA, typical value in Auto Mode	3.23	3.33	3.39	V
V_{out_5V}	Output voltage for 5-V option	V_IN = 5.8 V to 36 V, I_OUT = Maximum recommended load current	4.9	5	5.1	V
V_{out_5V}	Output voltage for 5-V option	V_IN = 5.5 V to 36 V, I_OUT=100 μA to 100 mA, typical value in Auto Mode	4.9	5.05	5.125	V
V_{out_ADJ}	Output voltage ADJ option	V_IN = V_OUT + 0.6 V to 36 V, I_OUT = 100 mA, FPWM mode	–2%		+2%
V_{out_ADJ}	Output voltage ADJ option	V_IN = V_OUT + 0.6 V to 36 V, I_OUT=100 μA to 100 mA, Auto mode	–2%		+2.5%
	Load regulation for ADJ option⁽¹⁾	V_IN = V_OUT + 1 V to 36 V, I_OUT = 0 A to 1 A, T_J = 125°C, FPWM mode		–1%
I_{Q_VIN}⁽²⁾	Input current to V_IN node of DC/DC utilizing the LM53600-Q1/LM53601-Q1	V_IN = 13.5 V, V_OUT = 3.3 V, I_OUT = 0 A		23		μA
I_{Q_VIN}⁽²⁾		V_IN = 13.5 V, V_OUT = 5 V, I_OUT = 0 A		30		μA
V_DROP1	Minimum input to output voltage differential to maintain regulation accuracy, without inductor DCR drop	V_OUT=3.3 V, I_OUT=1000 mA, +2/–3% output accuracy			0.6	V
V_DROP2	Minimum input to output voltage differential to maintain F_SW ≥ 1.85 MHz, without inductor DCR drop	V_OUT = 3.3 V, I_OUT=1000 mA, F_SW = 1.85 MHz, 2% regulation accuracy			2.0	V
Efficiency	Typical Efficiency without inductor loss	V_IN = 13.5 V, V_OUT = 5.0 V, I_OUT = 1 A		85%
		V_IN = 13.5 V, V_OUT = 3.3 V, I_OUT = 1 A		80%
		V_IN = 13.5 V, V_OUT = 5.0 V, I_OUT = 0.65 A		86%
		V_IN = 13.5 V, V_OUT = 3.3 V, I_OUT = 0.65 A		83%

(1) 125°C is worst case temperature for load regulation. Layout is critical since adjustable option does not have an AGND terminal.

(2) See Section 8.3.7 in Section 8 for the meaning of this specification and how it can be calculated.