ZHCSLI1D June 2020 – November 2023 LM339LV , LM393LV , TL331LV , TL391LV
PRODMIX
| 參數 | 測試條件 | 最小值 | 典型值 | 最大值 | 單位 | |
|---|---|---|---|---|---|---|
| 失調電壓 | ||||||
| VOS | 輸入失調電壓 | VS = 1.8 V 和 5 V | -2 | ±0.4 | 2 | mV |
| VOS | 輸入失調電壓 | VS = 1.8V 和 5V，TA = –40°C 至 +125°C | -3 | 3 | mV | |
| dVIO/dT | 輸入失調電壓漂移 | VS = 1.8V 和 5V，TA = –40°C 至 +125°C | ±1.5 | μV/°C | ||
| 電源 | ||||||
| IQ | 靜態電流（每個比較器） | VS = 1.8V 和 5V，無負載，低輸出 | 25 | 35 | μA | |
| IQ | 靜態電流（每個比較器） | VS = 1.8V 和 5V，無負載，低輸出，TA = –40°C 至 +125°C | 50 | |||
| PSRR | 電源抑制比 | VS = 1.8V 至 5V，TA = –40°C 至 +125°C | 70 | 80 | dB | |
| 輸入偏置電流 | ||||||
| IB | 輸入偏置電流 | VCM = VS/2 | 5 | pA | ||
| IOS | 輸入失調電流 | VCM = VS/2 | 1 | pA | ||
| 輸入電容 | ||||||
| CID | 輸入電容，差分 | VCM = VS/2 | 2 | pF | ||
| CIC | 輸入電容，共模 | VCM = VS/2 | 3 | pF | ||
| 輸入電壓范圍 | ||||||
| VCM-Range | 共模電壓范圍 | VS = 1.8V 和 5V，TA = –40°C 至 +125°C | (GND) | (V+) | V | |
| CMRR | 共模抑制比 | VS = 5V，(GND) < VCM < (V+)，TA = –40°C 至 +125°C | 60 | 65 | dB | |
| CMRR | 共模抑制比 | VS = 1.8V，(GND) < VCM < (V+)，TA = –40°C 至 +125°C | 50 | 60 | dB | |
| 開環增益 | ||||||
| AVD | 大信號差分電壓放大 | 50 | 200 | V/mV | ||
| 輸出 | ||||||
| VOL | GND 的電壓擺幅 | ISINK = 4mA，TA = 25°C | 150 | 200 | mV | |
| VOL | GND 的電壓擺幅 | ISINK = 4mA，TA = –40°C 至 +125°C | 300 | mV | ||
| ILKG | 開漏輸出泄漏電流 | VPULLUP = (V+)，TA = 25°C | 100 | pA | ||
| ISC | 短路電流 | VS = 5V，灌入 | 60 | 100 | mA | |