ZHCSDM9A December 2014 – March 2018 LDC1612 , LDC1614
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 Pin Configuration and Functions
- 6 Specifications
-
7 Detailed Description
- 7.1 Overview
- 7.2 Functional Block Diagram
- 7.3 Feature Description
- 7.4 Device Functional Modes
- 7.5 Programming
- 7.6
Register Maps
- 7.6.1 Register List
- 7.6.2 Address 0x00, DATA0_MSB
- 7.6.3 Address 0x01, DATA0_LSB
- 7.6.4 Address 0x02, DATA1_MSB
- 7.6.5 Address 0x03, DATA1_LSB
- 7.6.6 Address 0x04, DATA2_MSB (LDC1614 only)
- 7.6.7 Address 0x05, DATA2_LSB (LDC1614 only)
- 7.6.8 Address 0x06, DATA3_MSB (LDC1614 only)
- 7.6.9 Address 0x07, DATA3_LSB (LDC1614 only)
- 7.6.10 Address 0x08, RCOUNT0
- 7.6.11 Address 0x09, RCOUNT1
- 7.6.12 Address 0x0A, RCOUNT2 (LDC1614 only)
- 7.6.13 Address 0x0B, RCOUNT3 (LDC1614 only)
- 7.6.14 Address 0x0C, OFFSET0
- 7.6.15 Address 0x0D, OFFSET1
- 7.6.16 Address 0x0E, OFFSET2 (LDC1614 only)
- 7.6.17 Address 0x0F, OFFSET3 (LDC1614 only)
- 7.6.18 Address 0x10, SETTLECOUNT0
- 7.6.19 Address 0x11, SETTLECOUNT1
- 7.6.20 Address 0x12, SETTLECOUNT2 (LDC1614 only)
- 7.6.21 Address 0x13, SETTLECOUNT3 (LDC1614 only)
- 7.6.22 Address 0x14, CLOCK_DIVIDERS0
- 7.6.23 Address 0x15, CLOCK_DIVIDERS1
- 7.6.24 Address 0x16, CLOCK_DIVIDERS2 (LDC1614 only)
- 7.6.25 Address 0x17, CLOCK_DIVIDERS3 (LDC1614 only)
- 7.6.26 Address 0x18, STATUS
- 7.6.27 Address 0x19, ERROR_CONFIG
- 7.6.28 Address 0x1A, CONFIG
- 7.6.29 Address 0x1B, MUX_CONFIG
- 7.6.30 Address 0x1C, RESET_DEV
- 7.6.31 Address 0x1E, DRIVE_CURRENT0
- 7.6.32 Address 0x1F, DRIVE_CURRENT1
- 7.6.33 Address 0x20, DRIVE_CURRENT2 (LDC1614 only)
- 7.6.34 Address 0x21, DRIVE_CURRENT3 (LDC1614 only)
- 7.6.35 Address 0x7E, MANUFACTURER_ID
- 7.6.36 Address 0x7F, DEVICE_ID
-
8 Application and Implementation
- 8.1
Application Information
- 8.1.1 Conductive Objects in a Time-Varying EM Field
- 8.1.2 L-C Resonators
- 8.1.3 Multi-Channel and Single Channel Operation
- 8.1.4 Sensor Conversion Time
- 8.1.5 Sensor Current Drive Configuration
- 8.1.6 Clocking Architecture
- 8.1.7 Input Deglitch Filter
- 8.1.8 Device Status Registers
- 8.1.9 Multi-Channel Data Readback
- 8.2 Typical Application
- 8.1
Application Information
- 9 Power Supply Recommendations
- 10Layout
- 11器件和文檔支持
- 12機械、封裝和可訂購信息
8.1.1 Conductive Objects in a Time-Varying EM Field
An AC current flowing through an inductor will generate an AC magnetic field. If a conductive material, such as a metal object, is brought into the vicinity of the inductor, the magnetic field will induce a circulating current (eddy current) on the surface of the conductor.
Figure 49. Conductor in AC Magnetic Field
The eddy current is a function of the distance, size, and composition of the conductor. The eddy current generates its own magnetic field, which opposes the original field generated by the sensor inductor. This effect is equivalent to a set of coupled inductors, where the sensor inductor is the primary winding and the eddy current in the target object represents the secondary inductor. The coupling between the inductors is a function of the sensor inductor, and the resistivity, distance, size, and shape of the conductive target. The resistance and inductance of the secondary winding caused by the eddy current can be modeled as a distance dependent resistive and inductive component on the primary side (coil). Figure 49 shows a simplified circuit model of the sensor and the target as coupled coils.