ZHCSDM9A December 2014 – March 2018 LDC1612 , LDC1614
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 Pin Configuration and Functions
- 6 Specifications
-
7 Detailed Description
- 7.1 Overview
- 7.2 Functional Block Diagram
- 7.3 Feature Description
- 7.4 Device Functional Modes
- 7.5 Programming
- 7.6
Register Maps
- 7.6.1 Register List
- 7.6.2 Address 0x00, DATA0_MSB
- 7.6.3 Address 0x01, DATA0_LSB
- 7.6.4 Address 0x02, DATA1_MSB
- 7.6.5 Address 0x03, DATA1_LSB
- 7.6.6 Address 0x04, DATA2_MSB (LDC1614 only)
- 7.6.7 Address 0x05, DATA2_LSB (LDC1614 only)
- 7.6.8 Address 0x06, DATA3_MSB (LDC1614 only)
- 7.6.9 Address 0x07, DATA3_LSB (LDC1614 only)
- 7.6.10 Address 0x08, RCOUNT0
- 7.6.11 Address 0x09, RCOUNT1
- 7.6.12 Address 0x0A, RCOUNT2 (LDC1614 only)
- 7.6.13 Address 0x0B, RCOUNT3 (LDC1614 only)
- 7.6.14 Address 0x0C, OFFSET0
- 7.6.15 Address 0x0D, OFFSET1
- 7.6.16 Address 0x0E, OFFSET2 (LDC1614 only)
- 7.6.17 Address 0x0F, OFFSET3 (LDC1614 only)
- 7.6.18 Address 0x10, SETTLECOUNT0
- 7.6.19 Address 0x11, SETTLECOUNT1
- 7.6.20 Address 0x12, SETTLECOUNT2 (LDC1614 only)
- 7.6.21 Address 0x13, SETTLECOUNT3 (LDC1614 only)
- 7.6.22 Address 0x14, CLOCK_DIVIDERS0
- 7.6.23 Address 0x15, CLOCK_DIVIDERS1
- 7.6.24 Address 0x16, CLOCK_DIVIDERS2 (LDC1614 only)
- 7.6.25 Address 0x17, CLOCK_DIVIDERS3 (LDC1614 only)
- 7.6.26 Address 0x18, STATUS
- 7.6.27 Address 0x19, ERROR_CONFIG
- 7.6.28 Address 0x1A, CONFIG
- 7.6.29 Address 0x1B, MUX_CONFIG
- 7.6.30 Address 0x1C, RESET_DEV
- 7.6.31 Address 0x1E, DRIVE_CURRENT0
- 7.6.32 Address 0x1F, DRIVE_CURRENT1
- 7.6.33 Address 0x20, DRIVE_CURRENT2 (LDC1614 only)
- 7.6.34 Address 0x21, DRIVE_CURRENT3 (LDC1614 only)
- 7.6.35 Address 0x7E, MANUFACTURER_ID
- 7.6.36 Address 0x7F, DEVICE_ID
-
8 Application and Implementation
- 8.1
Application Information
- 8.1.1 Conductive Objects in a Time-Varying EM Field
- 8.1.2 L-C Resonators
- 8.1.3 Multi-Channel and Single Channel Operation
- 8.1.4 Sensor Conversion Time
- 8.1.5 Sensor Current Drive Configuration
- 8.1.6 Clocking Architecture
- 8.1.7 Input Deglitch Filter
- 8.1.8 Device Status Registers
- 8.1.9 Multi-Channel Data Readback
- 8.2 Typical Application
- 8.1
Application Information
- 9 Power Supply Recommendations
- 10Layout
- 11器件和文檔支持
- 12機械、封裝和可訂購信息
7.2 Functional Block Diagram
Figure 10. Block Diagrams for the LDC1612 (Left) and LDC1614 (Right)
The LDC1612/LDC1614 is composed of front-end resonant circuit drivers, followed by a multiplexer that sequences through the active channels, connecting them to the core that measures and digitizes the sensor frequency (ƒSENSOR). The core uses a reference frequency (ƒREF) to measure the sensor frequency. ƒREF is derived from either the internal reference clock (oscillator), or an externally supplied clock. The digitized output for each channel is proportional to the ratio of ƒSENSOR/ƒREF. The I2C interface is used to support device configuration and to transmit the digitized frequency values to a host processor. The LDC can be placed in an inactive shutdown mode to reduce current consumption by setting the SD pin to VDD. The INTB pin may be configured to notify the host of changes in system status.