12 Revision History

Changes from Revision F (November 2022) to Revision G (June 2023)

• 將整個文檔中的標準名稱從“DIN V VDE V 0884-11:2017-01”更改為“DIN EN IEC 60747-17 (VDE 0884-17)”Go
• 通篇刪除了對標準 IEC/EN/CSA 60950-1 的引用Go
• 通篇刪除了所有標準名稱中的標準版本和年份參考Go
• Added Maximum impulse voltage (V_IMP) per DIN EN IEC 60747-17 (VDE 0884-17) Go
• Changed test conditions and values of Maximum surge isolation voltage (V_IOSM) specification per DIN EN IEC 60747-17 (VDE 0884-17) Go
• Clarified method b test conditions of Apparent charge (q_PD) Go
• Changed maximum working voltage value From: 250 V_RMS To: 400 V_RMS for DBQ-16 devices per GB 4943.1Go
• Changed working voltage lifetime margin from: 87.5% to: 50%, minimum required insulation lifetime from: 37.5 years to: 30 years and insulation lifetime per TDDB from: 135 years to: 169 years per DIN EN IEC 60747-17 (VDE 0884-17)Go
• Changed Figure 8-7 per DIN EN IEC 60747-17 (VDE 0884-17)Go

Changes from Revision E (February 2019) to Revision F (November 2022)

• 更新了整個文檔中的表格、圖和交叉參考的編號格式Go

Changes from Revision D (November 2018) to Revision E (February 2019)

• Changed CPG parameter description from "External clearance" to "External creepage"Go

Changes from Revision C (January 2018) to Revision D (November 2018)

• 通篇進行了編輯性和修飾性更改Go
• 將“隔離柵壽命：>40 年”更改為“預計壽命超過 100 年”（位于節 1）Go
• 在節 1中添加了“隔離等級高達 5000V_RMS”Go
• 在節 1中添加了“浪涌能力高達 12.8kV”Go
• 在節 1中添加了“在整個隔離柵具有 ±8kV IEC 61000-4-2 接觸放電保護”Go
• 添加了“提供汽車版本：ISO776x-Q1”（位于節 1）Go
• 通篇刪除了“計劃的認證”這一表述Go
• 更新了節 2列表Go
• 更改了圖 3-1 以顯示串聯隔離電容器Go
• Added table note to Data rate specificationGo
• Changed V_IORM value for DW-16 package from "1414 V_PK" to "2121 V_PK Go
• Changed V_IOWM values for DW-16 package from "1000 V_RMS" and "1414 V_DC" to "1500 V_RMS" and "2121 V_DC"Go
• Updated certification informationGo
• Changed From: "Table 2" To: "Safety Related Certifications" in Table 7-1 table noteGo
• Changed Figure 7-3 Go
• Added Section 8.2.3.1 sub-section under Section 8.2.3 sectionGo

Changes from Revision B (November 2017) to Revision C (January 2018)

• Changed the C_IO value for the DBQ package from 1.1 to 0.9 pFGo

Changes from Revision A (August 2017) to Revision B (November 2017)

• 更改了特性 和安全相關認證 表中的 CSA 認證措辭Go
• 將 DBQ-16 封裝的隔離電壓從 2500 更改為 3000V_RMS Go
• Added the maximum transient isolation voltage for the DW-16 package of the ISO7761, ISO7762, and ISO7763 devices and changed the maximum value for the DBQ-16 package from 3600 to 4242 for all devicesGo
• Changed table note and table condition of safety limiting valuesGo
• Added the supply current vs data rate graphs for the ISO7761, ISO7762, and ISO7763 in the Typical Characteristics sectionGo

Changes from Revision * (August 2017) to Revision A (August 2017)

• Deleted EN from the Common-Mode Transient Immunity Test Circuit figureGo
• Changed the V_CC1 and V_CC2 signals in the Typical ISO7761 Circuit Hook-up figureGo