4 Revision History

Changes from Revision F (March 2015) to Revision G (June 2020)

• 添加了“功能安全型”特性Go
• 添加了 IEC 62368-1 特性Go
• 更改了應用Go
• 刪除了簡化原理圖中的檢測后斷開連接Go
• Changed thermal pad description Go
• Added I_OUT(SC) test condition Go
• Changed Figure 7-5 Go
• Changed the Section 8.3.4 section Go
• Added (BQ24040) to Figure 8-4 and Figure 8-5 Go
• Deleted Disconnect after Detection from Figure 9-1 Go
• Added link to BQ24040 Application ReportGo
• Deleted Disconnect after Detection from Figure 9-20 Go
• Moved Section 11.3 to Layout section Go

Changes from Revision E (February 2014) to Revision F (March 2015)

• 更改了器件信息 表的標題信息，并刪除了器件編號中的封裝標識Go
• Changed the Terminal Configuration and Functions To: Section 6 Go
• The storage temperature range has been moved to the Section 7.1 Go
• Changed the Handling Ratings table To: Section 7.2 and updated the guidelinesGo
• Added the package family to the column heading in the Section 7.4 .Go
• Added the NOTE to the Section 9 Go

Changes from Revision D (March 2013) to Revision E (February 2014)

• 添加了處理額定值 表、特性說明 部分、器件功能模式 部分、應用和實施 部分、電源相關建議 部分、布局 部分、器件和文檔支持 部分以及機械、封裝 和可訂購信息 部分Go
• Changed the Dissipation Rating table to the Section 7.4 .Go
• Changed V_{O_HT(REG)} in the Electrical Characteristics table to include new values BQ24045Go
• Added the Timing Requirements tableGo
• Deleted the last sentence in the first paragraph of the TS (BQ24040/5) section Go
• Added the Section 9.2.1.3 Go

Changes from Revision C (February 2013) to Revision D (March 2013)

• 將“特性”從固定 10 小時安全計時器更改為：固定 10 小時安全計時器，BQ24040 和 BQ24045Go
• Changed the OUT terminal DESCRIPTION Go
• Changed R_ISET NOM value in the ROC table From: 49.9 kΩ To: 10.8 kΩGo
• Changed R_{ISET_SHORT} test conditions From: R_ISET : 600Ω → 250Ω To: R_ISET : 540Ω → 250ΩGo
• Changed I_{OUT_CL} test conditions From: R_ISET : 600Ω → 250Ω To: R_ISET : 540Ω → 250ΩGo
• Deleted: Internally Set: BQ24041 from the TERMINATION sectionGo
• Added BQ24040 and BQ24045 only to the BATTERY CHARGING TIMERS AND FAULT TIMERS sectionGo
• Changed text in the ISET section From: "maximum current between 1.1A and 1.35A" To: "maximum current between 1.05A and 1.4A"Go
• Changed the Timers sectionGo
• Deleted: I_{OUT_TERM} = 54mA from the Typical Application Circuit: BQ24041, with ASI and ASO conditionsGo

Changes from Revision B (June 2012) to Revision C (February 2013)

• 添加了器件 BQ24045Go
• Added additional K_ISET information to the Electrical Characteristics tableGo
• Added graph - Load RegulationGo
• Added graph - Line RegulationGo

Changes from Revision A (September 2009) to Revision B (June 2012)

• 將所有出現的鋰離子更改為：鋰離子和鋰聚合物Go

Changes from Revision * (August 2009) to Revision A (September 2009)

• 將器件的狀態從“產品預發布”更改為量產數據Go