4 Revision History

Changes from March 14, 2023 to April 24, 2023 (from Revision F (April 2020) to Revision G (April 2023))

• 更改了文檔標題Go
• 更改了特性 部分：更改、刪除和重新編排了要點Go
• 將隔離標準從 DIN VDE V 0884-11 (VDE V 0884-10) 更改為 DIN EN IEC 60747-17 (VDE 0884-17)，并相應更新了絕緣規格 和安全相關認證 表Go
• 刪除了應用 部分中的最后一個要點Go
• 更改了說明 部分，以將共模去耦電容器作為已知的最佳實踐Go
• Changed pin names VINP to INP, VINN to INN, VOUTP to OUTP, and VOUTN to OUTN throughout documentGo
• Changed Description column and added footnotes to Pin Functions tableGo
• Changed CDM ESD standard from JESD22-C101 to JDEC JS-002 Go
• Changed PD from 81.4 mW to 99 mWGo
• Changed PD1 (VDD1 = 3.3 V) from  24.85 mW to 31 mWGo
• Changed PD1 (VDD1 = 5.5 V) from  45.65 mW to 54 mWGo
• Changed PD2 (VDD2 = 3.3 V) from 20.16 mW to 26 mWGo
• Changed PD2 (VDD2 = 5.5 V) from 35.75 mW to 45 mWGo
• Changed DTI from ≥0.027 mm to ≥0.021 mm in Insulation Specifications tableGo
• Changed IDD1 (3.0 V ≤ VDD1 ≤ 3.6 V) from 5.0 mA (typ) / 6.9 mA (max) to 6.3 mA (typ) / 8.5 mA (max)Go
• Changed IDD1 (4.5 V ≤ VDD1 ≤ 5.5 V) from 5.9 mA (typ) / 8.3 mA (max) to 7.2 mA (typ) / 9.8 mA (max)Go
• Changed IDD2 (3.0 V ≤ VDD2 ≤ 3.6 V) from 4.4 mA (typ) / 5.6 mA (max) to 5.3 mA (typ) / 7.2 mA (max)Go
• Changed IDD2 (4.5 V ≤ VDD2 ≤ 5.5 V) from 4.8 mA (typ) / 6.5 mA (max) to 5.9 mA (typ) / 8.1 mA (max)Go
• Changed Timing Diagram sectionGo
• Changed Overview sectionGo
• Changed Functional Block Diagram imageGo
• Changed the Analog Input sectionGo
• Added the Isolation Channel Signal Transmission sectionGo
• Added Analog Output section, deleted Fail-Safe Output sectionGo
• Changed Device Functional Modes sectionGo
• Changed Application Information sectionGo
• Changed Typical Application sectionGo
• Changed Best Design Practices sectionGo
• Changed Power Supply Recommendations sectionGo
• Changed the Recommended Layout of the AMC1301 figureGo
• Added a link to the Isolated Voltage-Measurement Circuit in the Related Documentation sectionGo