主頁 電源管理 序列

UCD90120

正在供貨

12 通道序列發生器和系統運行狀況監測器

可提供此產品的更新版本

功能與比較器件相同，且具有相同引腳
UCD90120A 正在供貨 具有ACPI 支持的 12 軌電源序列發生器和監視器 This product has an increased set of features.

產品詳情

Number of supplies monitored 13 Number of sequenced outputs 12 Rating Catalog Supply voltage (max) (V) 3.6 Supply voltage (min) (V) 3 Iq (typ) (mA) 50 Operating temperature range (°C) -40 to 125
Number of supplies monitored 13 Number of sequenced outputs 12 Rating Catalog Supply voltage (max) (V) 3.6 Supply voltage (min) (V) 3 Iq (typ) (mA) 50 Operating temperature range (°C) -40 to 125
VQFN (RGC) 64 81 mm2 9 x 9
  • Monitor and Sequence 12 Voltage Rails
    • All Rails Sampled Every 200μs
    • 12-bit ADC With 2.5V, 0.5% Internal VREF
    • Sequence Based on Time, Rail and Pin Dependencies
    • Six Hardware Comparators for Power Supply Fault Response in < 80μs
    • Four Programmable Under-Voltage and Over-Voltage Thresholds per Monitor
    • Programmable Fault Response Including Retries, Shutdown Slaves and Resequence
  • Non-Volatile Error Logging
    • Stores Up To 18 Faults
    • Log Peak Values For All Monitor Inputs
  • Closed Loop Margining for 10 Rails
    • Margin Output Adjusts Rail Voltage to Match User-Defined Margin Thresholds
    • Unused Margin Outputs can be Used as GPIOs or General-Purpose PWM Outputs
  • Watchdog Timer and System Reset
    • Programmable WDT Reset and Start Times
    • Configurable System Reset Pulse Widths
  • Flexible Digital I/O Configuration
    • Boolean Logic Builder for GPO Config
    • GPIOs can be Used as Enables, Resets, Power Good and Other On-Board Functions
  • Wide Range Single Supply (3.3V to 12V)
    • Internal Temperature Sensor
    • 64-Pin QFN Package
  • JTAG and I2C/SMBus/PMBus Interfaces
  • Fusion Digital Power GUI for Configuring and Monitoring Device Operation
  • APPLICATIONS
    • Industrial / ATE
    • Telecommunications and Networking Equipment
    • Servers and Storage Systems
    • Any System Requiring Sequencing and Monitoring of Multiple Power Rails
  • Monitor and Sequence 12 Voltage Rails
    • All Rails Sampled Every 200μs
    • 12-bit ADC With 2.5V, 0.5% Internal VREF
    • Sequence Based on Time, Rail and Pin Dependencies
    • Six Hardware Comparators for Power Supply Fault Response in < 80μs
    • Four Programmable Under-Voltage and Over-Voltage Thresholds per Monitor
    • Programmable Fault Response Including Retries, Shutdown Slaves and Resequence
  • Non-Volatile Error Logging
    • Stores Up To 18 Faults
    • Log Peak Values For All Monitor Inputs
  • Closed Loop Margining for 10 Rails
    • Margin Output Adjusts Rail Voltage to Match User-Defined Margin Thresholds
    • Unused Margin Outputs can be Used as GPIOs or General-Purpose PWM Outputs
  • Watchdog Timer and System Reset
    • Programmable WDT Reset and Start Times
    • Configurable System Reset Pulse Widths
  • Flexible Digital I/O Configuration
    • Boolean Logic Builder for GPO Config
    • GPIOs can be Used as Enables, Resets, Power Good and Other On-Board Functions
  • Wide Range Single Supply (3.3V to 12V)
    • Internal Temperature Sensor
    • 64-Pin QFN Package
  • JTAG and I2C/SMBus/PMBus Interfaces
  • Fusion Digital Power GUI for Configuring and Monitoring Device Operation
  • APPLICATIONS
    • Industrial / ATE
    • Telecommunications and Networking Equipment
    • Servers and Storage Systems
    • Any System Requiring Sequencing and Monitoring of Multiple Power Rails

The UCD90120 Power Supply Sequencer and System Health Monitor monitors and sequences up to 12 independent voltage rails. The device integrates a 12-bit ADC with a 2.5V internal reference for monitoring up to 13 power supply voltage, current, or temperature inputs.

26 GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading multiple UCD90120 devices, or other system functions. 12 of these pins can be used as PWM outputs for power supply margining or general-purpose PWM functions including clock generation for switch-mode power supplies.

The TI Fusion Digital Power Designer is provided for device configuration. This PC-based Graphical User Interface (GUI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.

The UCD90120 has an I2C/PMBus/SMBus communication interface for pre-production and in-system configuring and monitoring and a JTAG Port for production programming.

The UCD90120 Power Supply Sequencer and System Health Monitor monitors and sequences up to 12 independent voltage rails. The device integrates a 12-bit ADC with a 2.5V internal reference for monitoring up to 13 power supply voltage, current, or temperature inputs.

26 GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading multiple UCD90120 devices, or other system functions. 12 of these pins can be used as PWM outputs for power supply margining or general-purpose PWM functions including clock generation for switch-mode power supplies.

The TI Fusion Digital Power Designer is provided for device configuration. This PC-based Graphical User Interface (GUI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.

The UCD90120 has an I2C/PMBus/SMBus communication interface for pre-production and in-system configuring and monitoring and a JTAG Port for production programming.

下載 觀看帶字幕的視頻 視頻

最新的 UCD90xxx PMBus? 命令參考可從 https://www.ti.com/fusiondocs 獲取

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 10
類型 標題 下載最新的英語版本 日期
* 數據表 UCD90120 12-Channel Sequencer and System Health Controller 數據表 2009年 9月 8日
* 勘誤表 Errata Report for the UCD90120 and UCD90124 Devices 2010年 4月 26日
選擇指南 Voltage Supervisors (Reset ICs) Quick Reference Guide (Rev. H) 2020年 2月 28日
應用手冊 How to Decode UCD90xxx Fault Log With PMBus (Rev. A) 2019年 11月 7日
應用手冊 Design Voltage Margining Circuit for UCD90xxx Power Sequencer and System Manager (Rev. A) 2019年 5月 21日
應用手冊 UCD90xxx Family Frequently Asked Questions and Answers (Rev. B) 2019年 4月 12日
用戶指南 UCD90xxx Sequencer and System Health Controller PMBus? Command Reference (Rev. G) 2019年 4月 3日
應用手冊 Monitoring Voltage, Current and Temperature Using the UCD9012x 2012年 3月 23日
用戶指南 UCD90SEQ64EVM-650: 64-Pin Sequencer Development Board 2010年 12月 27日
EVM 用戶指南 UCD90120/4 EVM User's Guide 2009年 10月 6日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

評估板

UCD90SEQ64EVM-650 — 用于 UCD90xxx 64 引腳序列發生器和系統安全監控器的評估模塊

UCD90SEQ64EVM-650 是一個完全組裝且經過測試的電路，用于評估 64 引腳序列發生器和系統安全控制器，包括 UCD90120、UCD90124、UCD90120A、UCD90124A、UCD90910 和 UCD90160。
用戶指南: PDF
TI.com 上無現貨
應用軟件和框架

FUSION_DIGITAL_POWER_DESIGNER — Digital Power 軟件

Fusion Digital Power? 圖形用戶界面 (GUI) 軟件用于配置和監視精選的德州儀器 (TI) 數字電源控制器以及序列發生器/運行狀況監視器。此應用使用 PMBus 協議，通過 TI USB 適配器經由串行總線與器件進行通信。
下載
應用軟件和框架

FUSION_MFR_GUI — Fusion Digital Power 制造工具

The Fusion Digital Power Manufacturing Tool (aka MFR GUI) is a Graphical User Interface used to download firmware, upgrade firmware, configure, calibrate and test .

The MFR GUI supports the same devices as Fusion Digital Power Designer software.  This tool is typically used in manufacturing (...)

下載
IDE、配置、編譯器或調試器

SLVC223 — Fusion Digital Power Designer for Sequencer Devices v1.7.71

支持的產品和硬件

支持的產品和硬件

產品
序列
UCD90120 — 12 通道序列發生器和系統運行狀況監測器 UCD90124 — 具有風扇控制的 12 導軌序列發生器和系統安全控制器
仿真模型

UCD90120 BSDL

SLVC321.ZIP (2 KB) - BSDL Model
下載
計算工具

SLVC676 — UCD90xxx Voltage Margining Circuit Design Tool

支持的產品和硬件

支持的產品和硬件

產品
序列
UCD90120 — 12 通道序列發生器和系統運行狀況監測器 UCD90120A — 具有ACPI 支持的 12 軌電源序列發生器和監視器 UCD90124 — 具有風扇控制的 12 導軌序列發生器和系統安全控制器 UCD90124A — 具有風扇控制和 ACPI 支持的 12 軌序列發生器和系統安全監視器 UCD90160 — 支持 ACPI 的 16 軌電源序列發生器 UCD90160A — 支持 ACPI 的 16 軌 PMBus 電源序列發生器和系統管理器 UCD90240 — 24 軌 PMBus 電源序列發生器和電源管理器 UCD90320 — 32 軌 PMBus 電源序列發生器和系統管理器 UCD9090 — 10 通道序列發生器和系統運行狀況監測器 UCD9090A — 支持 ACPI 的 10 軌電源序列發生器和監測器
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用，包括業內超大的模型庫之一，涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫，您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案，然后再進行布局和制造，可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中，您可以搜索 TI (...)
發送申請
封裝 引腳 CAD 符號、封裝和 3D 模型
VQFN (RGC) 64 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

支持和培訓

視頻