主頁 接口 USB IC USB 集線器和控制器

TUSB9261-Q1

正在供貨

汽車類第二代超高速 USB 3.0 至串行 ATA 橋接器

產品詳情

Function USB3 USB speed (Mbps) 5000 Type Bridge Supply voltage (V) 1.1, 3.3 Rating Automotive Operating temperature range (°C) -40 to 85
Function USB3 USB speed (Mbps) 5000 Type Bridge Supply voltage (V) 1.1, 3.3 Rating Automotive Operating temperature range (°C) -40 to 85
HTQFP (PAP) 64 144 mm2 12 x 12
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Exceptions:
    • Device CDM ESD Classification Level C3
  • Ideal for bridging Serial ATA (SATA) Devices, Such
    as Hard Disk Drives (HDD), Solid State Drives (SSD),
    or Optical Drives (OD) to Universal Serial Bus (USB)
  • USB Interface
    • Integrated Transceiver Supports SS/HS/FS Signaling
    • Best in Class Adaptive Equalizer
      • Allows for Greater Jitter Tolerance in the Receiver
    • USB Class Support
      • USB Attached SCSI Protocol (UASP) for HDD and SSD
      • USB Mass Storage Class Bulk-Only Transport (BOT)
        Including Support for Error Conditions Per the
        13 Cases (Defined in the BOT Specification)
      • USB Bootability Support
      • USB Human Interface Device (HID)
    • Supports Firmware Update Via USB Using a TI Provided Application
  • SATA Interface
    • Serial ATA Specification Revision 2.6 Supporting gen1 and
      gen2 Data Rates
    • Supports hot plug
    • Supports Mass-Storage Devices Compatible with the ATA/ATAPI-8
      Specification
  • Integrated ARM Cortex M3 Core
    • Customizable Application Code Loaded From EEPROM Via SPI Interface
    • Two Additional SPI Port Chip Selects for Peripheral Connection
    • Up to 5 GPIOs for End-User Configuration via HID
    • Serial Communications Interface for Debug (UART)
  • General Features
    • Integrated Spread Spectrum Clock Generation Enables Operation
      from a Single Low Cost Crystal or Clock Oscillator
      • Supports 20, 25, 30 or 40 MHz
    • JTAG Interface for IEEE1149.1 and IEEE1149.6 Boundary Scan
    • Available in a Fully RoHS Compliant Package (PAP)
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Exceptions:
    • Device CDM ESD Classification Level C3
  • Ideal for bridging Serial ATA (SATA) Devices, Such
    as Hard Disk Drives (HDD), Solid State Drives (SSD),
    or Optical Drives (OD) to Universal Serial Bus (USB)
  • USB Interface
    • Integrated Transceiver Supports SS/HS/FS Signaling
    • Best in Class Adaptive Equalizer
      • Allows for Greater Jitter Tolerance in the Receiver
    • USB Class Support
      • USB Attached SCSI Protocol (UASP) for HDD and SSD
      • USB Mass Storage Class Bulk-Only Transport (BOT)
        Including Support for Error Conditions Per the
        13 Cases (Defined in the BOT Specification)
      • USB Bootability Support
      • USB Human Interface Device (HID)
    • Supports Firmware Update Via USB Using a TI Provided Application
  • SATA Interface
    • Serial ATA Specification Revision 2.6 Supporting gen1 and
      gen2 Data Rates
    • Supports hot plug
    • Supports Mass-Storage Devices Compatible with the ATA/ATAPI-8
      Specification
  • Integrated ARM Cortex M3 Core
    • Customizable Application Code Loaded From EEPROM Via SPI Interface
    • Two Additional SPI Port Chip Selects for Peripheral Connection
    • Up to 5 GPIOs for End-User Configuration via HID
    • Serial Communications Interface for Debug (UART)
  • General Features
    • Integrated Spread Spectrum Clock Generation Enables Operation
      from a Single Low Cost Crystal or Clock Oscillator
      • Supports 20, 25, 30 or 40 MHz
    • JTAG Interface for IEEE1149.1 and IEEE1149.6 Boundary Scan
    • Available in a Fully RoHS Compliant Package (PAP)

The TUSB9261-Q1 is an ARM cortex M3 microcontroller based Universal Serial Bus (USB) 3.0 to Serial ATA (SATA) bridge. It provides the necessary hardware and firmware to implement a USB Attached SCSI Protocol (UASP) compliant mass storage device suitable for bridging SATA compatible hard disk drives (HDD) and solid state disk drives (SSD) to a USB 3.0 bus. The firmware also implements the mass storage class bulk-only transport (BOT) for bridging optical drives and other compatible SATA devices to the USB bus. In addition to UASP and BOT support,a USB human interface device (HID) interfaces is supported for control of the general purpose input/ouput (GPIO). The SATA interface supports gen1 (1.5-Gbps) and gen2 (3.0-Gbps) for cable lengths up to 2 meters.

The device is available in a 64-pin HTQFP package and is designed for operation over the industrial temperature range of –40°C to 85°C.

The TUSB9261-Q1 is an ARM cortex M3 microcontroller based Universal Serial Bus (USB) 3.0 to Serial ATA (SATA) bridge. It provides the necessary hardware and firmware to implement a USB Attached SCSI Protocol (UASP) compliant mass storage device suitable for bridging SATA compatible hard disk drives (HDD) and solid state disk drives (SSD) to a USB 3.0 bus. The firmware also implements the mass storage class bulk-only transport (BOT) for bridging optical drives and other compatible SATA devices to the USB bus. In addition to UASP and BOT support,a USB human interface device (HID) interfaces is supported for control of the general purpose input/ouput (GPIO). The SATA interface supports gen1 (1.5-Gbps) and gen2 (3.0-Gbps) for cable lengths up to 2 meters.

The device is available in a 64-pin HTQFP package and is designed for operation over the industrial temperature range of –40°C to 85°C.
下載 觀看帶字幕的視頻 視頻

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 6
類型 標題 下載最新的英語版本 日期
* 數據表 TUSB9261-Q1 USB 3.0 to SATA Bridge 數據表 (Rev. A) 2014年 1月 31日
* 勘誤表 TUSB9261 Errata (Rev. B) 2012年 12月 20日
用戶指南 TUSB9261 DEMO User's Guide (Rev. A) 2014年 12月 9日
應用手冊 TUSB9261 Implementation Guide (Rev. E) 2014年 12月 9日
用戶指南 TUSB9260 Flash Burner - User Guide (Rev. D) 2013年 10月 24日
用戶指南 TUSB926x SpeedBoost Monitor User's Guide 2010年 9月 23日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

評估板

TUSB9261DEMO — TUSB9261 演示套件

The TUSB9261DEMO board is a bridge between a SuperSpeed USB (USB 3.0) bus and a Serial–ATA (SATA) development kit. The TUSB9261DEMO is used to evaluate system compatibility. It provides a TUSB9261 hardware for connection to a SATA device such as a solid state drive, hard disk drive, DVD (...)

View Options
固件

SLLC416 — TUSB926x Default Firmware, U1/U2 Disabled

支持的產品和硬件

支持的產品和硬件

產品
USB 集線器和控制器
TUSB9260 — 超高速 USB 3.0 至串行 ATA 橋接器 TUSB9261 — USB 3.0 5Gbps 轉 SATA 橋接器 TUSB9261-Q1 — 汽車類第二代超高速 USB 3.0 至串行 ATA 橋接器
軟件編程工具

SLLC414 — TUSB926x FlashBurner Utility

支持的產品和硬件

支持的產品和硬件

產品
USB 集線器和控制器
TUSB9260 — 超高速 USB 3.0 至串行 ATA 橋接器 TUSB9261 — USB 3.0 5Gbps 轉 SATA 橋接器 TUSB9261-Q1 — 汽車類第二代超高速 USB 3.0 至串行 ATA 橋接器
仿真模型

TUSB9261 IBIS Model

SLLM132.ZIP (1526 KB) - IBIS Model
下載
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用，包括業內超大的模型庫之一，涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫，您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案，然后再進行布局和制造，可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中，您可以搜索 TI (...)
發送申請
模擬工具

TINA-TI — 基于 SPICE 的模擬仿真程序

TINA-TI 提供了 SPICE 所有的傳統直流、瞬態和頻域分析以及更多。TINA 具有廣泛的后處理功能，允許您按照希望的方式設置結果的格式。虛擬儀器允許您選擇輸入波形、探針電路節點電壓和波形。TINA 的原理圖捕獲非常直觀 - 真正的“快速入門”。

TINA-TI 安裝需要大約 500MB。直接安裝，如果想卸載也很容易。我們相信您肯定會愛不釋手。

TINA 是德州儀器 (TI) 專有的 DesignSoft 產品。該免費版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需獲取可用 TINA-TI 模型的完整列表，請參閱：SpiceRack - 完整列表 

需要 HSpice (...)

用戶指南: PDF
英語版 (Rev.A): PDF
View Options
參考設計

TIDA-00148 — 用于汽車信息娛樂系統的 USB 2.0/3.0 海量存儲橋接器

此 TIDA-00148 參考設計采用 TUSB9261DEMO，允許快速評估用于汽車信息娛樂系統的 SATA 器件連接的系統兼容性。TIDA-00148 中使用的固件能夠支持單一 SATA 驅動器，如固態驅動器、硬盤驅動器、DVD 驅動器和 Blu-Ray 驅動器。TUSB9261-Q1 也已針對眾多器件進行全面回歸測試，可加速開發過程，促進產品更快上市。
設計指南: PDF
原理圖: PDF
封裝 引腳 CAD 符號、封裝和 3D 模型
HTQFP (PAP) 64 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻