主頁 電源管理 AC/DC 和 DC/DC 轉換器(集成 FET)

TPS61170

正在供貨

采用 2x2mm QFN 封裝的 1.2A 開關 38V 高壓升壓轉換器

產品詳情

Rating Catalog Topology Boost, Flyback, SEPIC Switch current limit (typ) (A) 1.2 Vin (max) (V) 18 Vin (min) (V) 3 Vout (max) (V) 38 Vout (min) (V) 3 Features Enable, Light-load efficiency, Nonsynchronous Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 1200 Operating temperature range (°C) -40 to 125 Iq (typ) (μA) 2300 Duty cycle (max) (%) 93 Type Converter
Rating Catalog Topology Boost, Flyback, SEPIC Switch current limit (typ) (A) 1.2 Vin (max) (V) 18 Vin (min) (V) 3 Vout (max) (V) 38 Vout (min) (V) 3 Features Enable, Light-load efficiency, Nonsynchronous Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 1200 Operating temperature range (°C) -40 to 125 Iq (typ) (μA) 2300 Duty cycle (max) (%) 93 Type Converter
WSON (DRV) 6 4 mm2 2 x 2
  • 3-V to 18-V Input Voltage Range
  • High Output Voltage: Up to 38 V
  • 1.2-A Integrated Switch
  • 1.2-MHz Fixed Switching Frequency
  • 12 V at 300 mA and 24 V at 150 mA From
    5-V Input (Typical)
  • Up to 93% Efficiency
  • Output Voltage Reprogramming
  • Skip-Switching Cycle for Output
    Regulation at Light Load
  • Built-in Soft Start
  • 6-Pin, 2-mm × 2-mm QFN Package
  • 3-V to 18-V Input Voltage Range
  • High Output Voltage: Up to 38 V
  • 1.2-A Integrated Switch
  • 1.2-MHz Fixed Switching Frequency
  • 12 V at 300 mA and 24 V at 150 mA From
    5-V Input (Typical)
  • Up to 93% Efficiency
  • Output Voltage Reprogramming
  • Skip-Switching Cycle for Output
    Regulation at Light Load
  • Built-in Soft Start
  • 6-Pin, 2-mm × 2-mm QFN Package

The TPS61170 is a monolithic, high-voltage switching regulator with integrated 1.2-A, 40-V power MOSFET. The device can be configured in several standard switching-regulator topologies, including boost and SEPIC. The device has a wide input-voltage range to support applications with input voltage from multicell batteries or regulated 5-V, 12-V power rails.

The TPS61170 operates at a 1.2-MHz switching frequency, allowing the use of low-profile inductors and low-value ceramic input and output capacitors. External loop compensation components give the user flexibility to optimize loop compensation and transient response. The device has built-in protection features, such as pulse-by-pulse overcurrent limit, soft start, and thermal shutdown.

The FB pin regulates to a reference voltage of 1.229 V. The reference voltage can be lowered using a 1-wire digital interface (Easyscale™ protocol) through the CTRL pin. Alternatively, a pulse width-modulation (PWM) signal can be applied to the CTRL pin. The duty cycle of the signal reduces the feedback reference voltage proportionally.

The TPS61170 is available in a 6-pin 2-mm × 2-mm QFN package, allowing a compact power-supply solution.

The TPS61170 is a monolithic, high-voltage switching regulator with integrated 1.2-A, 40-V power MOSFET. The device can be configured in several standard switching-regulator topologies, including boost and SEPIC. The device has a wide input-voltage range to support applications with input voltage from multicell batteries or regulated 5-V, 12-V power rails.

The TPS61170 operates at a 1.2-MHz switching frequency, allowing the use of low-profile inductors and low-value ceramic input and output capacitors. External loop compensation components give the user flexibility to optimize loop compensation and transient response. The device has built-in protection features, such as pulse-by-pulse overcurrent limit, soft start, and thermal shutdown.

The FB pin regulates to a reference voltage of 1.229 V. The reference voltage can be lowered using a 1-wire digital interface (Easyscale™ protocol) through the CTRL pin. Alternatively, a pulse width-modulation (PWM) signal can be applied to the CTRL pin. The duty cycle of the signal reduces the feedback reference voltage proportionally.

The TPS61170 is available in a 6-pin 2-mm × 2-mm QFN package, allowing a compact power-supply solution.

下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

功能與比較器件相同,但引腳排列有所不同
LM2733 正在供貨 采用 SOT-23 封裝、具有 40V 內部 FET 開關的 0.6/1.6MHz 升壓轉換器 Similar performance but different package
TPS61376 正在供貨 具有 2.5% 精度輸入平均電流限制和真正斷開功能的 25V、4.5A 升壓轉換器 TPS61376 has adjustable input current limited and true disconnection feature

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 30
類型 標題 下載最新的英語版本 日期
* 數據表 TPS61170 1.2-A High-Voltage Boost Converter in 2-mm x 2-mm2 QFN Package 數據表 (Rev. D) PDF | HTML 2014年 12月 18日
白皮書 A Comparative Analysis of Insulation Monitoring Device (IMD) Architectures in Bidirectional Onboard Chargers PDF | HTML 2025年 10月 21日
應用手冊 QFN 和 SON PCB 連接 (Rev. C) PDF | HTML 英語版 (Rev.C) PDF | HTML 2024年 1月 5日
應用手冊 Basic Calculation of a Boost Converter's Power Stage... (Rev. D) PDF | HTML 2022年 11月 21日
應用手冊 升壓轉換器功率級的基本計算 (Rev. D) PDF | HTML 英語版 (Rev.D) PDF | HTML 2022年 11月 11日
應用手冊 使用外部偏置來擴展升壓轉換器的輸入電壓范圍 PDF | HTML 英語版 PDF | HTML 2022年 9月 23日
應用手冊 Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018年 12月 11日
選擇指南 電源管理指南 2018 (Rev. K) 2018年 7月 31日
應用手冊 Charging Supercapacitor Banks from USB Type C Port With Boost Converter 2018年 7月 17日
選擇指南 電源管理指南 2018 (Rev. R) 2018年 6月 25日
應用手冊 Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B) 2017年 11月 29日
應用手冊 Input Current Limit Solution for USB-Supplied Power System 2017年 8月 3日
應用手冊 Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 2017年 6月 15日
應用手冊 Design of UVLO for LM27313 (Rev. B) 2014年 4月 8日
模擬設計期刊 簡單開路保護升壓轉換器在LED驅動器應用程序 英語版 2012年 12月 6日
模擬設計期刊 2012 年第 4 季度刊模擬應用學報 2012年 9月 25日
應用手冊 How to Design a Boost Converter With the TPS61170 (Rev. C) 2012年 6月 6日
模擬設計期刊 IQ:它是什么、不是什么以及如何使用 英語版 2011年 8月 17日
模擬設計期刊 耦合電感器拓寬了 DC/DC 轉換器的使用范疇 英語版 2011年 4月 5日
應用手冊 Load Disconnect for the TPS61170 (Rev. A) 2011年 3月 14日
應用手冊 Description Compensating the Current Mode Boost Control Loop 2010年 12月 9日
模擬設計期刊 3Q 2010 Issue Analog Applications Journal 2010年 8月 11日
EVM 用戶指南 TPS61170EVM-280 User's Guide (Rev. C) 2009年 9月 18日
應用手冊 How to Design a SEPIC Converter With the TPS61175 2009年 6月 12日
模擬設計期刊 Compensating and measuring the DC/DC converter loop that powers a high-power LED 2008年 10月 22日
模擬設計期刊 Q4 2008 Issue Analog Applications Journal 2008年 10月 22日
模擬設計期刊 基于 SEPIC 拓撲設計的 DC/DC 轉換器 2008年 10月 22日
EVM 用戶指南 TPS61170EVM-316 (Rev. A) 2008年 9月 25日
應用手冊 優化具有內部補償功能的 DC-DC 轉換器的瞬態響應 最新英語版本 (Rev.B) 2008年 7月 15日
更多文獻資料 Seminar 400 Topic 1 - Current-Mode Control of Switching Power Supplies 2001年 2月 15日

設計和開發

如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。

評估板

TPS61170EVM-280 — TPS61170 12V 輸入、24V 輸出、0.34A 評估模塊

The TPS61170EVM-280 facilitates evaluation of the TPS61170 High Voltage 1.2 A Boost Converter. The TPS61170 is monolithic high voltage switching regulator. It can be operated in several of the standard switching configurations, including boost and SEPIC. The 1.2 A, 40 V high (...)

用戶指南: PDF
TI.com 上無現貨
評估板

TPS61170EVM-316 — TPS61170EVM-316 評估模塊

TPS61170EVM-316 簡化了 TPS61170 高壓 1.2A 升壓轉換器在 SEPIC 配置中的評估過程。
用戶指南: PDF
TI.com 上無現貨
支持軟件

SLVC160 TPS61170 Design Software

支持的產品和硬件

支持的產品和硬件

產品
AC/DC 和 DC/DC 轉換器(集成 FET)
TPS61170 采用 2x2mm QFN 封裝的 1.2A 開關 38V 高壓升壓轉換器
支持軟件

TPS6116XEVM-SW — TPS6116x 評估模塊的軟件

The TPS6116xEVM-SW software provides a software interface for the TPS6116x/70 EVM boards. Use this software to change the TPS6116x IC register via the USB Interface Adapter.
仿真模型

TPS61170 TINA-TI Transient Reference Design

SLVM230.TSC (416 KB) - TINA-TI Reference Design
仿真模型

TPS61170 TINA-TI Transient Spice Model

SLVM231.ZIP (55 KB) - TINA-TI Spice Model
仿真模型

TPS61170 Unencrypted PSPICE Transient Model Package (Rev. A)

SLVM100A.ZIP (33 KB) - PSpice Model
光繪文件

TPS61170 Gerber Files

SLVC153.ZIP (100 KB)
參考設計

TIDA-00626 — 采用雜散抑制參考設計的集成式合成器 9.8GHz 射頻 CW 信號發生器

此設計為 9.8GHz 寬帶、低相位噪聲、集成式連續波 (CW) 射頻信號發生器,使用了多功能雜散抑制技術。輸出電平可在 -32dBm 至 14.5dBm 之間(階躍為 0.5dB)進行編程。此信號發生器可用作模擬和矢量信號發生器等應用的本地振蕩器,也可用作射頻 ADC 的時鐘發生器。用戶可通過 TI USB2ANY 接口或使用微控制器 MSP430F5529 LaunchPad 從任何 PC 上控制 TIDA-00626。
設計指南: PDF
原理圖: PDF
參考設計

TIDA-010009 — 適用于伺服驅動器的緊湊型、高效、24V 輸入輔助電源參考設計

該參考設計展示了一種生成伺服或交流驅動器所需電源的方法,其中包括模擬和數字 I/O 接口、編碼器電源、隔離式收發器和數字處理塊。該設計還實現了輸入反極性、輸出過載和短路保護。
設計指南: PDF
原理圖: PDF
參考設計

PMP4494 — 具有 200ms 輸出電壓保持時間的 5V 至 3.3V、1.2A DC-DC 轉換器電路參考設計

PMP4494 是一款具有 Vout 保持電路的 5V 至 3.3V、1.2A DC-DC 轉換器。該設計采用同步降壓轉換器 LM20242 來為系統電壓提供高效率。升壓轉換器 TPS61170 可將輔助軌從 10V 升壓到 20V,以提供備用電壓。電源電壓監控器 TLV809 可監控系統電壓,并在系統電壓低于閾值電壓后將電源切換到備用電壓。結合升壓電路,在仍滿足 200mS 保持時間規格的同時,保持電容顯著減小。
測試報告: PDF
原理圖: PDF
參考設計

TIDA-00231 — 針對 PLC 模擬輸出模塊的自適應電源,具有輸出通道保護

TIDA-00231 是適用于工業可編程邏輯控制器 (PLC) 模擬輸出模塊的參考設計。該設計提供獨特的節能解決方案,適用于帶自適應電源的基于數模轉換器 (DAC) 的模擬電流輸出模塊。該自適應電源可動態調節 DAC 的 AVDD 電源并在大于 300? 的典型負載電阻下,將功率損耗限制為大于 50mW。模擬輸出可以提供最高 24mA 的電流。此參考設計包括必要的板載保護電路,并經測試符合有關 IO 控制器平臺的 IEC61000-4 標準的 EFT、ESD 和浪涌要求。保護電流不會給設計帶來負面影響,而測試結果表明典型的不可調整誤差低于 FSR 的 0.2%,校準精度為 0.05%。
設計指南: PDF
原理圖: PDF
參考設計

TIDA-00304 — 斷電保持能源存儲解決方案

此解決方案可為系統(如固態硬盤)存儲和提供“最后關頭”的能量;如此,這些系統便可在掉電后憑借這些能量短時間運行以便能夠以受控的方式關閉。通過存儲高于總線電壓的滯留能量,電容量可減少多達 80%,顯著降低解決方案的尺寸和成本,同時提高可靠性。
通常需要使用復雜的電子電路來升高輸入電壓,在電源故障期間將其與降壓輸入進行多路復用,并為負載將其降壓到 3.3V 或 5V。


此參考設計在輸入端采用 TI 的 TPS25942 來控制浪涌、提供過壓、欠壓和短路保護并防止存儲的能量流回短路的輸入總線。升壓轉換器將電容器組充電到 12V(如果輸入電壓為 5V)或 18V(如果輸入電壓為 12V)。當 (...)

設計指南: PDF
原理圖: PDF
封裝 引腳 CAD 符號、封裝和 3D 模型
WSON (DRV) 6 Ultra Librarian

訂購和質量

包含信息:
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息:
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻