TPS61061
- LED Driver With Integrated Overvoltage
and Short-Circuit Protection - 2.7-V to 6-V Input Voltage Range
- 500-mV/250-mV Feedback Voltage
- TPS61060 Powers Up to 3 LEDs
- TPS61061 Powers Up to 4 LEDs
- TPS61062 Powers Up to 5 LEDs
- PWM Brightness Control on Enable
- Digital Brightness Control on ILED
- 1-MHz Fixed Switching Frequency
- 400-mA Internal Power MOSFET Switch
- LEDs Disconnected During Shutdown
- Operates With Small-Output Capacitors
Down to 220 nF - Up to 80% Efficiency
- 8-Pin NanoFree? Package (Chipscale, CSP)
- 3 × 3-mm QFN Package
The TPS6106x is a high-frequency, synchronous boost converter with constant current output to drive up to 5 white LEDs. For maximum safety, the device features integrated overvoltage and an advanced short-circuit protection when the output is shorted to ground. The device operates with 1-MHz fixed switching frequency to allow for the use of small external components and to simplify possible EMI problems. The device comes with three different overvoltage protection thresholds (14 V/18 V/23 V) to allow inexpensive and small-output capacitors with lower voltage ratings. The LED current is initially set with the external sense resistor Rs, and the feedback voltage is regulated to 500 mV or 250 mV, depending on the ILED pin configuration. Digital brightness control is implemented by applying a simple digital signal to the ILED pin. Alternatively, a PWM signal up to 1 kHz can be applied to the enable pin to control the LED brightness. During shutdown, the output is disconnected from the input to avoid leakage current through the LEDs.
技術文檔
| 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 數據表 | TPS6106x Constant Current LED Driver With Digital and PWM Brightness Control 數據表 (Rev. B) | PDF | HTML | 2014年 12月 9日 | ||
| 白皮書 | 常見 LED 功能和 LED 驅動器設計注意事項 | 英語版 | 2020年 9月 21日 | |||
| 應用手冊 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018年 12月 11日 | ||||
| 選擇指南 | 電源管理指南 2018 (Rev. K) | 2018年 7月 31日 | ||||
| 選擇指南 | 電源管理指南 2018 (Rev. R) | 2018年 6月 25日 | ||||
| 應用手冊 | Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B) | 2017年 11月 29日 | ||||
| 應用手冊 | Extending the Soft Start Time Without a Soft Start Pin (Rev. B) | 2017年 6月 15日 | ||||
| 應用手冊 | 優化具有內部補償功能的 DC-DC 轉換器的瞬態響應 | 最新英語版本 (Rev.B) | 2008年 7月 15日 | |||
| 應用手冊 | 最小化升壓轉換器開關節點處的振鈴 | 英語版 | 2008年 7月 15日 | |||
| 應用手冊 | TPS61060/61/62: Single-Wire Digital Brightness Control | 2006年 5月 5日 | ||||
| 更多文獻資料 | Seminar 400 Topic 1 - Current-Mode Control of Switching Power Supplies | 2001年 2月 15日 |
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具
借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?
在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
TIDC-ZLIGHT2-W — 針對家庭和樓宇自動化的簡易白色可調光 ZigBee 互連 LED 照明
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| DSBGA (YZF) | 8 | Ultra Librarian |
| VSON (DRB) | 8 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。