TPS54319
- Two 45-m
(typical) MOSFETs for High Efficiency at 3-A Loads - 300kHz to 2MHz Switching Frequency
- 0.8 V ± 3.0% Voltage Reference Over Temperature (0°C to 85°C)
- Synchronizes to External Clock
- Adjustable Slow Start/Sequencing
- UV and OV Power Good Output
- –40°C to 150°C Operating Junction Temperature Range
- Thermally Enhanced 3mm × 3mm 16-pin QFN
- Pin Compatible to TPS54318
- APPLICATIONS
- Low-Voltage, High-Density Power Systems
- Point-of-Load Regulation for Consumer Applications such as Set Top Boxes,
LCD Displays, CPE Equipment
SWIFT, SwitcherPro are trademarks of Texas Instruments.
The TPS54319 device is a full featured 6 V, 3 A, synchronous step down current mode converter with two integrated MOSFETs.
The TPS54319 enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2 MHz switching frequency, and minimizing the IC footprint with a small 3mm × 3mm thermally enhanced QFN package.
The TPS54319 provides accurate regulation for a variety of loads with an accurate ±3.0% Voltage Reference (VREF) over temperature.
Efficiency is maximized through the integrated 45m
MOSFETs and 360µA typical supply current. Using the enable pin, shutdown supply current is reduced to 2 µA by entering a shutdown mode.
Under voltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output voltage startup ramp is controlled by the slow start pin. An open drain power good signal indicates the output is within 93% to 107% of its nominal voltage.
Frequency fold back and thermal shutdown protects the device during an over-current condition.
The TPS54319 is supported in the SwitcherPro™ Software Tool at www.ti.com/switcherpro.
For more SWIFT™ documentation, see the TI website at www.ti.com/swift.
技術文檔
| 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 數據表 | 2.95 V to 6 V Input, 3-A Output, 2MHz, Synchronous Step Down Switcher With Integ 數據表 | 2010年 1月 28日 | |||
| 白皮書 | Understanding the trade-offs and technologies to increase power density........N (Rev. C) | PDF | HTML | 2023年 4月 27日 | |||
| 白皮書 | 了解提高功率密度的利弊權衡和所需 技術 (Rev. C) | PDF | HTML | 英語版 (Rev.C) | PDF | HTML | 2023年 4月 27日 | |
| 白皮書 | Understanding the trade-offs and technologies to increase power density........K (Rev. C) | PDF | HTML | 2023年 4月 26日 | |||
| 白皮書 | Understanding the trade-offs and technologies to increase power density........G (Rev. C) | PDF | HTML | 2023年 4月 14日 | |||
| 技術文章 | Smaller size now possible in 3A point-of-load converters | PDF | HTML | 2015年 6月 3日 | |||
| 應用手冊 | Designing Type III Compensation for Current Mode Step-Down Converters (Rev. A) | 2010年 9月 15日 | ||||
| EVM 用戶指南 | TPS54319EVM-626 3-A, SWIFT Regulator Evaluation Module | 2010年 5月 19日 |
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
ADS58J64EVM — ADS58J64 評估模塊
ADS58J64EVM 是一款評估板,用于評估德州儀器 (TI) 的 ADS58J64 集成式接收器。ADS58J64 是一款擁有緩沖模擬輸入的 14 位、500MSPS 低功耗四通道電信接收器。該器件支持 JESD204B 接口和高達 10Gbps 的數據速率。該 EVM 具備變壓器耦合模擬輸入和時鐘輸入,以此來支持單端信號源和時鐘源,同時還可適應多種信號頻率。模擬輸入端的變壓器以背對背方式連接,可實現更出色的振幅和相位匹配性能。板載時鐘合成器/分配芯片 LMK04828 可用于為 ADC 及數據采集板 (TSW14J56EVM) 的 JESD204B (...)
TPS54319EVM-626 — 用于 TPS54319 降壓 DC/DC 轉換器的評估模塊
TPS54319 Unencrypted PSpice Average Model Package (Rev. A)
TPS54319 Unencrypted PSpice Transient Model Package (Rev. B)
TIDA-01378 — 適用于上行 DOCSIS 3.1 應用的寬帶接收器參考設計
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。