產品詳情

Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface Software Output power (W) 30 Power stage supply (max) (V) 26 Power stage supply (min) (V) 4.5 THD + N at 1 kHz (%) 0.13 Load (min) (Ω) 4 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 3.6 Rating Catalog Operating temperature range (°C) 0 to 85
Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface Software Output power (W) 30 Power stage supply (max) (V) 26 Power stage supply (min) (V) 4.5 THD + N at 1 kHz (%) 0.13 Load (min) (Ω) 4 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 3.6 Rating Catalog Operating temperature range (°C) 0 to 85
HTQFP (PHP) 48 81 mm2 9 x 9
  • Audio Input/Output
    • TAS5717 Supports 2×10 W and TAS5719 Supports 2×15 W Output
    • Wide PVDD Range, From 4.5 V to 26 V
    • Efficient Class-D Operation Eliminates Need for Heatsinks
    • Requires Only 3.3 V and PVDD
    • One Serial Audio Input (Two Audio Channels)
    • I2C Address Selection via PIN (Chip Select)
    • Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
    • External Headphone-Amplifier Shutdown Signal
    • Integrated CAP-Free Headphone Amplifier
    • Stereo Headphone (Stereo 2-V RMS Line Driver) Outputs
  • Audio/PWM Processing
    • Independent Channel Volume Controls With 24-dB to Mute
    • Programmable Two-Band Dynamic Range Control
    • 14 Programmable Biquads for Speaker EQ
    • Programmable Coefficients for DRC Filters
    • DC Blocking Filters
    • 0.125-dB Fine Volume Support
  • General Features
    • Serial Control Interface Operational Without MCLK
    • Factory-Trimmed Internal Oscillator for Automatic Rate Detection
    • Surface Mount, 48-Pin, 7-mm × 7-mm HTQFP Package
    • AD, BD, and Ternary PWM-Mode Support
    • Thermal and Short-Circuit Protection
  • Benefits
    • EQ: Speaker Equalization Improves Audio Performance
    • DRC: Dynamic Range Compression. Can Be Used As Power Limiter.
      Enables Speaker Protection, Easy Listening, Night-Mode Listening
    • DirectPath Technology: Eliminates Bulky DC Blocking Capacitors
    • Stereo Headphone/Stereo Line Drivers: Adjust Gain via External Resistors,
      Dedicated Active Headpone Mute Pin, High Signal-to-Noise Ratio
    • Two-Band DRC: Set Two Different Thresholds for Low- and
      High-Frequency Content

FilterPro is a trademark of Texas Instruments.
  • Audio Input/Output
    • TAS5717 Supports 2×10 W and TAS5719 Supports 2×15 W Output
    • Wide PVDD Range, From 4.5 V to 26 V
    • Efficient Class-D Operation Eliminates Need for Heatsinks
    • Requires Only 3.3 V and PVDD
    • One Serial Audio Input (Two Audio Channels)
    • I2C Address Selection via PIN (Chip Select)
    • Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
    • External Headphone-Amplifier Shutdown Signal
    • Integrated CAP-Free Headphone Amplifier
    • Stereo Headphone (Stereo 2-V RMS Line Driver) Outputs
  • Audio/PWM Processing
    • Independent Channel Volume Controls With 24-dB to Mute
    • Programmable Two-Band Dynamic Range Control
    • 14 Programmable Biquads for Speaker EQ
    • Programmable Coefficients for DRC Filters
    • DC Blocking Filters
    • 0.125-dB Fine Volume Support
  • General Features
    • Serial Control Interface Operational Without MCLK
    • Factory-Trimmed Internal Oscillator for Automatic Rate Detection
    • Surface Mount, 48-Pin, 7-mm × 7-mm HTQFP Package
    • AD, BD, and Ternary PWM-Mode Support
    • Thermal and Short-Circuit Protection
  • Benefits
    • EQ: Speaker Equalization Improves Audio Performance
    • DRC: Dynamic Range Compression. Can Be Used As Power Limiter.
      Enables Speaker Protection, Easy Listening, Night-Mode Listening
    • DirectPath Technology: Eliminates Bulky DC Blocking Capacitors
    • Stereo Headphone/Stereo Line Drivers: Adjust Gain via External Resistors,
      Dedicated Active Headpone Mute Pin, High Signal-to-Noise Ratio
    • Two-Band DRC: Set Two Different Thresholds for Low- and
      High-Frequency Content

FilterPro is a trademark of Texas Instruments.

The TAS5717/TAS5719 is a 10-W/15-W, efficient, digital audio-power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.

The TAS5717/9 is a slave-only device receiving all clocks from external sources. The TAS5717/TAS5719 operates with a PWM carrier between a 384-kHz switching rate and a 352-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

The TAS5717/TAS5719 is a 10-W/15-W, efficient, digital audio-power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.

The TAS5717/9 is a slave-only device receiving all clocks from external sources. The TAS5717/TAS5719 operates with a PWM carrier between a 384-kHz switching rate and a 352-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.
下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

open-in-new 比較替代產品
功能與比較器件相同，但引腳排列有所不同
TAS5805M 正在供貨 具有處理功能的 23W 立體聲、45W 單聲道、4.5V 至 26.4V 電源電壓、數字輸入 D 類音頻放大器 TAS5805M is our 23-W stereo, 45-W mono Class-D digital input audio amplifier.

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 6
類型 標題 下載最新的英語版本 日期
* 數據表 TAS5717 / TAS5719 Digital-Input Stereo Amplifier With Integrated CAP-Free HP Amp 數據表 (Rev. A) 2011年 2月 8日
應用手冊 Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 2019年 8月 26日
應用手冊 AN-1849 An Audio Amplifier Power Supply Design (Rev. C) 2019年 6月 27日
應用手冊 Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) 2013年 10月 28日
應用手冊 AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 2013年 5月 1日
用戶指南 10W/15W DIGITAL AUDIO POWER AMPLIFIER WITH INTEGRATED CAP-FREE HP AMPLIFIER 2010年 10月 26日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

評估板

TAS5717EVM — TAS5717EVM 評估模塊

TAS5717EVM 評估模塊可演示 TAS5717PHP 的功能。TAS5717 綜合了 10W 立體聲 D 類音頻功率放大器與 TI 專利 DirectPath 地居中耳機。該 EVM 和附帶的材料使用戶可以使用雙頻帶 DRC、可編程 EQ、數字 THD 管理器進行試驗，以及作為 2Vrms 線路驅動器或 40mW 耳機配置地居中輸出路徑。有關 TAS5717 功能的詳細信息，請參閱 TI.com 上提供的數據表。

用戶指南: PDF
TI.com 上無現貨
驅動程序或庫

TAS571XSW-LINUX — 適用于 TAS571X 的 Linux 驅動程序

Linux 驅動程序支持 TAS571x 系列數字輸入立體聲放大器。Linux 驅動程序支持通過 I2C 總線和接口與 Linux DAI（數字音頻接口）進行通信。
Linux 主線狀態

在 Linux 主線中提供：是
可通過 git.ti.com 獲取：不適用

支持的器件：
  • tas5711
  • tas5717
  • tas5719
  • tas5721
Linux 源文件

與該器件關聯的文件為：

  1. sound/soc/codecs/tas571x.c
  2. Documentation/devicetree/bindings/sound/tas571x.txt
  3. sound/soc/codecs/tas571x.h

源文件 (...)

View Options
評估模塊 (EVM) 用 GUI

SLOC228 — TAS57X_v3.2_Build_7 GUI Setup

支持的產品和硬件

支持的產品和硬件

產品
General-purpose audio amplifiers
TAS5717 — 具有集成式無電容耳機的 10W 立體聲、4.5V 至 26V、數字輸入開環 D 類放大器 TAS5727 — 具有揚聲器 EQ 和 DRC 的 25W 單聲道、8V 至 26V 電源電壓、數字輸入、開環 D 類音頻放大器
Speaker, TV & soundbar audio amplifiers
TAS5713 — 具有 EQ 和 DRC 的 25W 立體聲、8V 至 26V 電源電壓、數字輸入、開環 D 類音頻放大器 TAS5715 — 具有 EQ、DRC 和 HP 的 25W 立體聲、8V 至 26V、數字輸入、開環 D 類音頻放大器 TAS5719 — 具有集成式無電容耳機的 15W 立體聲、4.5V 至 26V、數字輸入開環 D 類放大器
硬件開發
評估板
TAS5715EVM — TAS5715EVM 評估模塊 TAS5717EVM — TAS5717EVM 評估模塊 TAS5719EVM — TAS5719EVM 評估模塊 TAS5727EVM — TAS5727EVM 評估模塊
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用，包括業內超大的模型庫之一，涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫，您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案，然后再進行布局和制造，可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中，您可以搜索 TI (...)
發送申請
封裝 引腳 CAD 符號、封裝和 3D 模型
HTQFP (PHP) 48 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻