數據表
MAX3232-EP
- RS-232 Bus-Pin ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM) - Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards
- Operates With 3-V to 5.5-V VCC Supply
- Operates Up To 250 kbit/s
- Two Drivers and Two Receivers
- Low Supply Current . . . 300 μA Typical
- External Capacitors . . . 4 × 0.1 μF
- Accepts 5-V Logic Input With 3.3-V Supply
- Alternative High-Speed Pin-Compatible Device (1 Mbit/s)
- SNx5C3232
- SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Military (–55°C/125°C) Temperature Range(1)
- Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
- APPLICATIONS
- Battery-Powered Systems, PDAs, Notebooks, Laptops,
Palmtop PCs, and Hand-Held Equipment
- Battery-Powered Systems, PDAs, Notebooks, Laptops,
(1) Additional temperature ranges are available - contact factory
The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
技術文檔
未找到結果。請清除搜索并重試。
查看全部 3 | 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 輻射與可靠性報告 | MAX3232MPWREP Reliability Report | 2016年 1月 13日 | |||
| * | 輻射與可靠性報告 | MAX3232MDBREP Reliability Report | 2016年 1月 13日 | |||
| * | 數據表 | 3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver w/+/-15-kV ESD 數據表 (Rev. A) | 2009年 3月 23日 |
訂購和質量
包含信息:
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續(xù)可靠性監(jiān)測
包含信息:
- 制造廠地點
- 封裝廠地點