產品詳情

Local sensor accuracy (max) 3 Type Fan Controller Operating temperature range (°C) 0 to 85 Supply voltage (min) (V) 3 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features PWM output, Tachometer Supply current (max) (μA) 900 Temp resolution (max) (bps) 8 Remote channels (#) 2 Addresses 3 Rating Catalog
Local sensor accuracy (max) 3 Type Fan Controller Operating temperature range (°C) 0 to 85 Supply voltage (min) (V) 3 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features PWM output, Tachometer Supply current (max) (μA) 900 Temp resolution (max) (bps) 8 Remote channels (#) 2 Addresses 3 Rating Catalog
TSSOP (DGG) 56 113.4 mm2 14 x 8.1
  • 8-bit ΣΔ ADC
  • Monitors 16 Power Supplies
  • Monitors 2 Remote Thermal Diodes
  • Internal Ambient Temperature Sensing
  • Programmable Autonomous Fan Control Based on Temperature Readings with Fan Boost Support
  • Fan Control Based on 13-step Lookup Table
  • Temperature Reading Digital Filter
  • 1.0°C Digital Temperature Sensor Resolution
  • 0.5°C Temperature Resolution for Fan Control
  • 2 PWM Fan Speed Control Outputs
  • 4 Fan Tachometer Inputs
  • Dual Processor Thermal Throttling (PROCHOT) Monitoring
  • Dual Dynamic VID Monitoring (6 VIDs per Processor)
  • 8 General Purpose I/Os:
    • 4 Can be Configured as Fan Tachometer Inputs
    • 2 Can be Configured to Connect to THERMTRIP from a Processor
    • 2 are Standard GPIOs that Could be Used to Monitor IERR Signal
  • 2 General Purpose Inputs that Can be Used to Monitor SCSI Termination Signals
  • Limit Register Comparisons of All Monitored Values
  • 2-wire, SMBus 2.0 Compliant, Serial Digital Interface
    • Supports Byte/block Read and Write
    • Configurable Slave Address (Tri-level Pin Selects 1 of 3 Possible Addresses)
  • 2.5V Reference Voltage Output
  • 56-pin TSSOP Package
  • XOR-tree Test Mode
  • Key Specifications
    • Voltage Measurement Accuracy ±2% FS (max)
    • Resolution 8-bits, 1°C
    • Temperature Sensor Accuracy ±3°C (max)
    • Temperature Range:LM93 Operational 0°C to +85°CRemote Temp Accuracy 0°C to +125°C
    • Power Supply Voltage +3.0V to +3.6V
    • Power Supply Current 0.9 mA

All trademarks are the property of their respective owners.

  • 8-bit ΣΔ ADC
  • Monitors 16 Power Supplies
  • Monitors 2 Remote Thermal Diodes
  • Internal Ambient Temperature Sensing
  • Programmable Autonomous Fan Control Based on Temperature Readings with Fan Boost Support
  • Fan Control Based on 13-step Lookup Table
  • Temperature Reading Digital Filter
  • 1.0°C Digital Temperature Sensor Resolution
  • 0.5°C Temperature Resolution for Fan Control
  • 2 PWM Fan Speed Control Outputs
  • 4 Fan Tachometer Inputs
  • Dual Processor Thermal Throttling (PROCHOT) Monitoring
  • Dual Dynamic VID Monitoring (6 VIDs per Processor)
  • 8 General Purpose I/Os:
    • 4 Can be Configured as Fan Tachometer Inputs
    • 2 Can be Configured to Connect to THERMTRIP from a Processor
    • 2 are Standard GPIOs that Could be Used to Monitor IERR Signal
  • 2 General Purpose Inputs that Can be Used to Monitor SCSI Termination Signals
  • Limit Register Comparisons of All Monitored Values
  • 2-wire, SMBus 2.0 Compliant, Serial Digital Interface
    • Supports Byte/block Read and Write
    • Configurable Slave Address (Tri-level Pin Selects 1 of 3 Possible Addresses)
  • 2.5V Reference Voltage Output
  • 56-pin TSSOP Package
  • XOR-tree Test Mode
  • Key Specifications
    • Voltage Measurement Accuracy ±2% FS (max)
    • Resolution 8-bits, 1°C
    • Temperature Sensor Accuracy ±3°C (max)
    • Temperature Range:LM93 Operational 0°C to +85°CRemote Temp Accuracy 0°C to +125°C
    • Power Supply Voltage +3.0V to +3.6V
    • Power Supply Current 0.9 mA

All trademarks are the property of their respective owners.

The LM93, hardware monitor, has a two wire digital interface compatible with SMBus 2.0. Using an 8-bit ΣΔ ADC, the LM93 measures the temperature of two remote diode connected transistors as well as its own die and 16 power supply voltages.

To set fan speed, the LM93 has two PWM outputs that are each controlled by up to four temperature zones. The fan-control algorithm is lookup table based. The LM93 includes a digital filter that can be invoked to smooth temperature readings for better control of fan speed. The LM93 has four tachometer inputs to measure fan speed. Limit and status registers for all measured values are included.

The LM93 builds upon the functionality of previous motherboard management ASICs and uses some of the LM85's features (i.e. smart tachometer mode). It also adds measurement and control support for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual processor Xeon class motherboard with a minimum of external components.

The LM93, hardware monitor, has a two wire digital interface compatible with SMBus 2.0. Using an 8-bit ΣΔ ADC, the LM93 measures the temperature of two remote diode connected transistors as well as its own die and 16 power supply voltages.

To set fan speed, the LM93 has two PWM outputs that are each controlled by up to four temperature zones. The fan-control algorithm is lookup table based. The LM93 includes a digital filter that can be invoked to smooth temperature readings for better control of fan speed. The LM93 has four tachometer inputs to measure fan speed. Limit and status registers for all measured values are included.

The LM93 builds upon the functionality of previous motherboard management ASICs and uses some of the LM85's features (i.e. smart tachometer mode). It also adds measurement and control support for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual processor Xeon class motherboard with a minimum of external components.

下載 觀看帶字幕的視頻 視頻

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 1
類型 標題 下載最新的英語版本 日期
* 數據表 LM93 Hardware Monitor with Integrated Fan Control for Server Management 數據表 (Rev. E) 2013年 3月 27日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

驅動程序或庫

LM93SW-LINUX — 用于 LM93 的 Linux 驅動程序

Linux 驅動程序支持 LM93 系列硬件監測計。Linux 驅動程序支持通過 I2C 總線進行通信，并可與硬件監控子系統交互。
Linux 主線狀態

在 Linux 主線中提供：是
可通過 git.ti.com 獲取：不適用

支持的器件：
  • lm93
  • lm94
Linux 源文件

與該器件關聯的文件為：

  1. drivers/hwmon/lm93.c
  2. Documentation/hwmon/lm93
源文件

drivers/hwmon/lm93.c

其他文件

Documentation/hwmon/lm93

 

啟用驅動程序支持

使用“make menuconfig”（也可以使用“make (...)
View Options
支持軟件

DIGITALTEMPSENSORSEVM-SW — Eval Board Software for Hardware Monitors and Digital Temp Sensors

Evaluation Board Software for Hardware Monitors and Digital Temperature Sensors
支持的產品和硬件

支持的產品和硬件

產品
數字溫度傳感器
LM63 — 1 條遠程和本地通道溫度傳感器，帶風扇控制功能 LM64 — 帶風扇控制功能和 5 個 GPIO 的遠程和本地溫度傳感器 LM71 — 具有 SPI 接口的 ±1.5°C 溫度傳感器 LM71-Q1 — 具有 SPI 接口的汽車級 ±1.5°C 溫度傳感器 LM73 — 具有 I2C/SMBus 接口的 ±1°C 溫度傳感器 LM86 — 具有 SMBus 接口的 ±0.75°C 遠程和本地溫度傳感器 LM89 — 具有 SMBus 接口和 2 個地址用于總線共享的 ±0.75°C 遠程和本地溫度傳感器 LM90 — 具有 SMBus 接口的遠程和本地溫度傳感器 LM93 — 具有 2 條遠程和 1 條本地通道的溫度傳感器，帶硬件監控器和 16 個電源電壓監控器 LM95010 — 具有 SensorPath 接口的 ±2°C 溫度傳感器 LM95071 — 具有 SPI 接口的 ±1°C 溫度傳感器 LM95221 — 具有 β 補償、SMBus 和 I2C 接口的 ±3°C 雙路遠程和本地溫度傳感器 LM95231 — 采用 TruTherm 技術且具有 SMBus 接口的雙路遠程和本地溫度傳感器 LM95235 — 具有 SMBus 接口、采用 β 補償技術、適用于 65/90nm 處理器二極管的 ±0.75°C 遠程和本地溫度傳感器 LM95235-Q1 — 采用 TruTherm 技術且具有 SMBus 接口的汽車級 ±2°C 遠程和本地溫度傳感器 LM96000 — 硬件監控器，帶風扇控制功能和 6 個電源電壓監控器 LM96080 — 1 條本地通道溫度傳感器，帶風扇轉速控制功能和電源電壓監控器 LM96163 — 具有 1 條遠程和本地通道的溫度傳感器，帶 β 補償和風扇控制功能 LM99 — 采用 TruTherm 技術且具有 SMBus 接口的遠程和本地溫度傳感器
支持軟件

SENSOREVAL — Eval Board Software For Hardware Monitors And Digital Temperature Sensors

SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

  • Download SensorEval Software and Manual
  • Windows XP support is offered for (...)
支持的產品和硬件

支持的產品和硬件

產品
數字溫度傳感器
LM63 — 1 條遠程和本地通道溫度傳感器，帶風扇控制功能 LM64 — 帶風扇控制功能和 5 個 GPIO 的遠程和本地溫度傳感器 LM71 — 具有 SPI 接口的 ±1.5°C 溫度傳感器 LM71-Q1 — 具有 SPI 接口的汽車級 ±1.5°C 溫度傳感器 LM73 — 具有 I2C/SMBus 接口的 ±1°C 溫度傳感器 LM75A — 具有 I2C/SMBus 接口的 2C 業界通用溫度傳感器 LM86 — 具有 SMBus 接口的 ±0.75°C 遠程和本地溫度傳感器 LM89 — 具有 SMBus 接口和 2 個地址用于總線共享的 ±0.75°C 遠程和本地溫度傳感器 LM90 — 具有 SMBus 接口的遠程和本地溫度傳感器 LM93 — 具有 2 條遠程和 1 條本地通道的溫度傳感器，帶硬件監控器和 16 個電源電壓監控器 LM95010 — 具有 SensorPath 接口的 ±2°C 溫度傳感器 LM95071 — 具有 SPI 接口的 ±1°C 溫度傳感器 LM95172-Q1 — 具有 SPI 接口且支持 200°C 溫度的汽車級 ±1°C 溫度傳感器 LM95214 — 具有 SMBus 接口的 ±2°C 四路遠程和本地溫度傳感器 LM95221 — 具有 β 補償、SMBus 和 I2C 接口的 ±3°C 雙路遠程和本地溫度傳感器 LM95231 — 采用 TruTherm 技術且具有 SMBus 接口的雙路遠程和本地溫度傳感器 LM95233 — 采用 TruTherm 技術且具有 SMBus 接口的 ±2°C 雙路遠程和本地溫度傳感器 LM95234 — 采用 TruTherm 技術且具有 SMBus 接口的 ±2°C 四路遠程和本地溫度傳感器 LM95235 — 具有 SMBus 接口、采用 β 補償技術、適用于 65/90nm 處理器二極管的 ±0.75°C 遠程和本地溫度傳感器 LM95235-Q1 — 采用 TruTherm 技術且具有 SMBus 接口的汽車級 ±2°C 遠程和本地溫度傳感器 LM95241 — 具有 β 補償、SMBus 和 I2C 的 ±1.25°C 雙路遠程和本地溫度傳感器 LM95245 — 具有 SMBus 接口、采用 β 補償技術、適用于 45nm 處理器二極管的 ±0.75°C 遠程和本地溫度傳感器 LM96000 — 硬件監控器，帶風扇控制功能和 6 個電源電壓監控器 LM96080 — 1 條本地通道溫度傳感器，帶風扇轉速控制功能和電源電壓監控器 LM96163 — 具有 1 條遠程和本地通道的溫度傳感器，帶 β 補償和風扇控制功能 LM99 — 采用 TruTherm 技術且具有 SMBus 接口的遠程和本地溫度傳感器
精密 ADC
ADC128D818 — 具有溫度傳感器、內部/外部電壓基準和 I2C 接口的 12 位、82SPS、8 通道 Δ-Σ ADC
仿真模型

LM93 IBIS Model

SNAM023.ZIP (5 KB) - IBIS Model
下載
封裝 引腳 CAD 符號、封裝和 3D 模型
TSSOP (DGG) 56 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

支持和培訓

視頻