主頁 接口 I2C、I3C 和 SPI IC I2C 和 SPI 通用 I/O (GPIO)

LM8323

正在供貨

移動 I/O 配套支持 Keyscan、I/O 擴展、PWM 和 ACCESS.bus 主機接口

產品詳情

Supply voltage (min) (V) 1.62 Supply voltage (max) (V) 1.98 Rating Catalog Frequency (max) (MHz) 0.4 Operating temperature range (°C) -40 to 85
Supply voltage (min) (V) 1.62 Supply voltage (max) (V) 1.98 Rating Catalog Frequency (max) (MHz) 0.4 Operating temperature range (°C) -40 to 85
CS-BGA (NYB) 36 12.25 mm2 3.5 x 3.5
  • Key Features
    • Supports Keypad Matrices of up to 8 × 12 Keys Plus 8 Special-function (SF) Keys for a Total of 104 Keys. SF Keys Pull Keypad Scan Inputs Directly to Ground, Rather than Connecting to a Keypad Scan Output.
    • Supports I2C-compatible ACCESS.bus Interface in Slave Mode up to 400 kHz (Fast-mode).
    • Three Host-programmable PWM Outputs Useful for Smooth LED Brightness Modulation.
    • Supports General-purpose I/O Expansion on Pins Not Otherwise Used for Keypad or Rotary Encoder Interface.
    • Key-scan Event Storage in a FIFO Buffer for up to 15 Events.
    • Key Events, Errors, and Dedicated Hardware Interrupts Request Host Service by Asserting the IRQ Output.
    • The Correct Reception of a Command May be Assumed, if No Error is Reported from the LM8323 After Receiving it.
    • Wake-up from Halt Mode on any Matrix Key-scan Event, any Use of the SF Keys, or Any Activity on the ACCESS.bus Interface, or Any Change in the Rotary Encoder Counter Value (if Enabled).
  • Host-Controlled Functions
    • Three PWM Outputs
    • Period of Inactivity that Triggers Entry into Halt Mode
    • Debounce Time for Reliable Key Event Polling
    • Configuration of General-purpose I/O Ports
    • Various Initialization Options (Keypad Size, etc.)
  • Key Device Characteristics
    • 1.8V ± 180 mV Single-supply Operation
    • On-chip Power-on Reset (POR)
    • Watchdog Timer
    • Dedicated Slow Clock Input for 32 kHz
    • -40°C to +85°C Industrial Temperature Range
    • 36-pin csBGA Package

All trademarks are the property of their respective owners.

  • Key Features
    • Supports Keypad Matrices of up to 8 × 12 Keys Plus 8 Special-function (SF) Keys for a Total of 104 Keys. SF Keys Pull Keypad Scan Inputs Directly to Ground, Rather than Connecting to a Keypad Scan Output.
    • Supports I2C-compatible ACCESS.bus Interface in Slave Mode up to 400 kHz (Fast-mode).
    • Three Host-programmable PWM Outputs Useful for Smooth LED Brightness Modulation.
    • Supports General-purpose I/O Expansion on Pins Not Otherwise Used for Keypad or Rotary Encoder Interface.
    • Key-scan Event Storage in a FIFO Buffer for up to 15 Events.
    • Key Events, Errors, and Dedicated Hardware Interrupts Request Host Service by Asserting the IRQ Output.
    • The Correct Reception of a Command May be Assumed, if No Error is Reported from the LM8323 After Receiving it.
    • Wake-up from Halt Mode on any Matrix Key-scan Event, any Use of the SF Keys, or Any Activity on the ACCESS.bus Interface, or Any Change in the Rotary Encoder Counter Value (if Enabled).
  • Host-Controlled Functions
    • Three PWM Outputs
    • Period of Inactivity that Triggers Entry into Halt Mode
    • Debounce Time for Reliable Key Event Polling
    • Configuration of General-purpose I/O Ports
    • Various Initialization Options (Keypad Size, etc.)
  • Key Device Characteristics
    • 1.8V ± 180 mV Single-supply Operation
    • On-chip Power-on Reset (POR)
    • Watchdog Timer
    • Dedicated Slow Clock Input for 32 kHz
    • -40°C to +85°C Industrial Temperature Range
    • 36-pin csBGA Package

All trademarks are the property of their respective owners.

The LM8323 key-scan controller is a dedicated device to unburden a host from scanning a matrix-addressed keypad. In addition, the LM8323 provides general-purpose I/O expansion, a rotary encoder interface and PWM outputs useful for dynamic LED brightness modulation.

It communicates with the host through an I2C-compatible ACCESS.bus interface. An interrupt output is available for signaling key-press and key-release events. Communication frequencies up to 400 kHz (Fast-mode) bus speed are supported. The LM8323 supports a predefined set of commands. These commands enable a host device to keep control over all functions.

The LM8323 key-scan controller is a dedicated device to unburden a host from scanning a matrix-addressed keypad. In addition, the LM8323 provides general-purpose I/O expansion, a rotary encoder interface and PWM outputs useful for dynamic LED brightness modulation.

It communicates with the host through an I2C-compatible ACCESS.bus interface. An interrupt output is available for signaling key-press and key-release events. Communication frequencies up to 400 kHz (Fast-mode) bus speed are supported. The LM8323 supports a predefined set of commands. These commands enable a host device to keep control over all functions.
下載 觀看帶字幕的視頻 視頻

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 4
類型 標題 下載最新的英語版本 日期
* 數據表 Mobile I/O Comp Supp Keyscan, I/O Expansion, PWM, & ACCESS.bus Host I/F 數據表 (Rev. A) 2013年 3月 26日
應用手冊 Understanding the I2C Bus PDF | HTML 2015年 6月 30日
應用手冊 Maximum Clock Frequency of I2C Bus Using Repeaters 2015年 5月 15日
應用手冊 I2C Bus Pull-Up Resistor Calculation PDF | HTML 2015年 2月 13日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用，包括業內超大的模型庫之一，涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫，您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案，然后再進行布局和制造，可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中，您可以搜索 TI (...)
發送申請
模擬工具

TINA-TI — 基于 SPICE 的模擬仿真程序

TINA-TI 提供了 SPICE 所有的傳統直流、瞬態和頻域分析以及更多。TINA 具有廣泛的后處理功能，允許您按照希望的方式設置結果的格式。虛擬儀器允許您選擇輸入波形、探針電路節點電壓和波形。TINA 的原理圖捕獲非常直觀 - 真正的“快速入門”。

TINA-TI 安裝需要大約 500MB。直接安裝，如果想卸載也很容易。我們相信您肯定會愛不釋手。

TINA 是德州儀器 (TI) 專有的 DesignSoft 產品。該免費版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需獲取可用 TINA-TI 模型的完整列表，請參閱：SpiceRack - 完整列表 

需要 HSpice (...)

用戶指南: PDF
英語版 (Rev.A): PDF
View Options
封裝 引腳 CAD 符號、封裝和 3D 模型
CS-BGA (NYB) 36 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

支持和培訓

視頻