LM139AQML-SP
- Available With Radiation Ensured
- Total Ionizing Dose 100 krad(Si)
- ELDRS Free 100 krad(Si)
- Wide Supply Voltage Range
- LM139/139A Series 2 to 36 VDC or ±1 to ±18 VDC
- Very Low Supply Current Drain (0.8 mA) — Independent of Supply Voltage
- Low Input Biasing Current: 25 nA
- Low Input Offset Current: ±5 nA
- Offset Voltage: ±1 mV
- Input Common-mode Voltage Range Includes GND
- Differential Input Voltage Range Equal to the Power Supply Voltage
- Low Output Saturation Voltage: 250 mV at 4 mA
- Output Voltage Compatible with TTL, DTL, ECL, MOS and CMOS Logic Systems
All trademarks are the property of their respective owners.
The LM139 series consists of four independent precision voltage comparators with an offset voltage specification as low as 2 mV max for all four comparators. These were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage.
Application areas include limit comparators, simple analog to digital converters; pulse, squarewave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates. The LM139 series was designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, they will directly interface with MOS logic— where the low power drain of the LM139/LM139A is a distinct advantage over standard comparators.
技術文檔
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
UC1843BEVM-CVAL — UC1843B-SP 電流模式 PWM 控制器評估模塊
STARD-3P-STAR-TIGER — STAR-Dundee 使用 TI 耐輻射電源和模擬 IC 的 STAR-Tiger SpaceFibre 電源
STAR-Tiger 是一款高性能 SpaceFibre 路由交換機,作為歐盟 Hi-SIDE 項目的一部分,獲得了歐洲航天論壇的航空創新獎。STAR-TIGER 交換機中的電源板為用于實現路由交換機的 Xilinx KU060 FPGA 提供主電源軌。STAR-Tiger 電源板使用德州儀器 (TI) 的耐輻射電源器件,提供了可實現航天器高性能計算和組網的穩健電源。
PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具
借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?
在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模擬仿真程序
TINA-TI 安裝需要大約 500MB。直接安裝,如果想卸載也很容易。我們相信您肯定會愛不釋手。
TINA 是德州儀器 (TI) 專有的 DesignSoft 產品。該免費版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。
如需獲取可用 TINA-TI 模型的完整列表,請參閱:SpiceRack - 完整列表
需要 HSpice (...)
TIDA-070002 — 20 至 40V 輸入電壓、50W 航天級隔離型反激式 DC/DC 過流保護參考設計
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| CDIP (J) | 14 | Ultra Librarian |
| CFP (NAC) | 14 | Ultra Librarian |
| CFP (NAD) | 14 | Ultra Librarian |
| DIESALE (Y) | — |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。