產品詳情

Number of full bridges 1 Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Peak output current (A) 10 RDS(ON) (HS + LS) (mΩ) 150 Sleep current (μA) 15 Control mode Independent 1/2-Bridge, PH/EN, PWM Control interface Hardware (GPIO), SPI Features Current sense Amplifier, Integrated Current Sensing, Open-Load Detection Topology Integrated FET Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 1 Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Peak output current (A) 10 RDS(ON) (HS + LS) (mΩ) 150 Sleep current (μA) 15 Control mode Independent 1/2-Bridge, PH/EN, PWM Control interface Hardware (GPIO), SPI Features Current sense Amplifier, Integrated Current Sensing, Open-Load Detection Topology Integrated FET Rating Catalog Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 24 49.92 mm2 7.8 x 6.4
  • H-Bridge Motor Driver
    • Drives One DC Motor, One Winding of a Stepper Motor, or Solenoid Loads
  • 4.5-V to 38-V Operating Voltage Range
  • 10-A Peak Current Drive
  • Low HS + LS RDS(ON)
    • 150 m? at TJ = 25°C, 13.5 V
    • 250 m? at TJ = 150°C, 13.5 V
  • Current Mirror for Output Current Sensing
  • Configurable Control Interface
    • PH/EN
    • PWM (IN1/IN2)
    • Independent Half-Bridge Control
  • Supports 1.8-V, 3.3-V, 5-V Logic Inputs
  • SPI or Hardware Interface Options
  • Low-Power Sleep Mode (10 μA)
  • Small Package and Footprint
    • 24 HTSSOP PowerPAD? IC Package
  • Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Charge Pump Undervoltage (CPUV)
    • Overcurrent Protection (OCP)
    • Output short to battery and short to ground protection
    • Open Load Detection
    • Thermal Shutdown (TSD)
    • Fault Condition Output (nFAULT / SPI)
  • H-Bridge Motor Driver
    • Drives One DC Motor, One Winding of a Stepper Motor, or Solenoid Loads
  • 4.5-V to 38-V Operating Voltage Range
  • 10-A Peak Current Drive
  • Low HS + LS RDS(ON)
    • 150 m? at TJ = 25°C, 13.5 V
    • 250 m? at TJ = 150°C, 13.5 V
  • Current Mirror for Output Current Sensing
  • Configurable Control Interface
    • PH/EN
    • PWM (IN1/IN2)
    • Independent Half-Bridge Control
  • Supports 1.8-V, 3.3-V, 5-V Logic Inputs
  • SPI or Hardware Interface Options
  • Low-Power Sleep Mode (10 μA)
  • Small Package and Footprint
    • 24 HTSSOP PowerPAD? IC Package
  • Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Charge Pump Undervoltage (CPUV)
    • Overcurrent Protection (OCP)
    • Output short to battery and short to ground protection
    • Open Load Detection
    • Thermal Shutdown (TSD)
    • Fault Condition Output (nFAULT / SPI)

The DRV8873 device is an integrated driver IC for driving a brushed DC motor in industrial applications. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that drive motors bi-directionally with up to 10-A peak current. The device operates from a single power supply and supports a wide input supply range from 4.5 V to 38 V.

A PH/EN or PWM interface allows simple interfacing to controller circuits. Alternatively, independent half-bridge control is available to drive two solenoid loads.

A current mirror allows the controller to monitor the load current. This mirror approximates the current through the high-side FETs, and does not require a high-power resistor for sensing the current.

A low-power sleep mode is provided to achieve very-low quiescent current draw by shutting down much of the internal circuitry. Internal protection functions are provided for undervoltage lockout, charge pump faults, overcurrent protection, short-circuit protection, open-load detection, and overtemperature. Fault conditions are indicated on an nFAULT pin and through the SPI registers.

The DRV8873 device is an integrated driver IC for driving a brushed DC motor in industrial applications. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that drive motors bi-directionally with up to 10-A peak current. The device operates from a single power supply and supports a wide input supply range from 4.5 V to 38 V.

A PH/EN or PWM interface allows simple interfacing to controller circuits. Alternatively, independent half-bridge control is available to drive two solenoid loads.

A current mirror allows the controller to monitor the load current. This mirror approximates the current through the high-side FETs, and does not require a high-power resistor for sensing the current.

A low-power sleep mode is provided to achieve very-low quiescent current draw by shutting down much of the internal circuitry. Internal protection functions are provided for undervoltage lockout, charge pump faults, overcurrent protection, short-circuit protection, open-load detection, and overtemperature. Fault conditions are indicated on an nFAULT pin and through the SPI registers.
下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

功能與比較器件相似
DRV8256 正在供貨 采用集成電流檢測和智能調優技術的 50V、8A H 橋電機驅動器 48V, 8A H-Bridge Motor Driver With Integrated Current Sense and Smart Tune Technology

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 13
類型 標題 下載最新的英語版本 日期
* 數據表 DRV8873 H-Bridge Motor Driver 數據表 PDF | HTML 2018年 6月 11日
證書 DRV8873HEVM EU Declaration of Conformity (DoC) 2023年 7月 12日
證書 DRV8873SEVM EU Declaration of Conformity (DoC) 2023年 7月 11日
應用簡報 集成電流感測的優勢 (Rev. B) PDF | HTML 英語版 (Rev.B) PDF | HTML 2022年 10月 12日
應用手冊 使用電機驅動器驅動螺線管 (Rev. A) PDF | HTML 英語版 (Rev.A) PDF | HTML 2022年 7月 25日
應用手冊 串行外設接口的菊花鏈實現 (Rev. A) 英語版 (Rev.A) 2021年 11月 6日
技術文章 Overcoming design challenges for brushed-DC motors in smart sanitation systems PDF | HTML 2020年 7月 1日
技術文章 Helping physicians achieve faster, more accurate patient diagnoses with molecular PDF | HTML 2020年 5月 20日
技術文章 Automating smart home blinds, shades and shutters with motor drivers PDF | HTML 2020年 1月 2日
應用簡報 Small Motors in Large Appliances 2018年 7月 20日
應用手冊 PowerPAD? Thermally Enhanced Package (Rev. H) 2018年 7月 6日
應用手冊 所選封裝材料的熱學和電學性質 2008年 10月 16日
應用簡報 PowerPAD? 輕松實現 (Rev. B) 2004年 5月 12日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

評估板

DRV8873HEVM — 具有硬件接口和集成電流檢測功能的汽車類 10A H 橋電機驅動器

DRV8873 是一款適用于工業和汽車應用的集成驅動器。該器件擁有 10A 的峰值電流和 4.5V 至 38V 的電壓范圍，可支持多種應用。PH/EN 或 PWM 接口可輕松連接至控制器電路，同時還可以通過獨立半橋控制來驅動兩個螺線管負載。

電流鏡近似于流經高側 FET 的電流，并且不需要使用電流檢測電阻器。

提供了低功耗睡眠模式，以通過關斷大量內部電路來實現超低的靜態電流消耗。

針對欠壓鎖定、電荷泵故障、過流保護、短路保護和過熱等情況提供內部保護功能，并且 nFAULT 引腳上的故障狀況指示燈和 SPI 寄存器會顯示相關故障。

用戶指南: PDF
TI.com 上無現貨
評估板

DRV8873SEVM — 具有 SPI 接口和集成式電流檢測功能的 10A H 橋電機驅動器評估模塊

DRV8873 是一款適用于工業和汽車應用的集成驅動器。該器件擁有 10A 的峰值電流和 4.5V 至 38V 的電壓范圍，可支持多種應用。

PH/EN 或 PWM 接口可輕松連接至控制器電路，同時還可以通過獨立半橋控制來驅動兩個螺線管負載。電流鏡近似于流經高側 FET 的電流，并且不需要使用電流檢測電阻器。

提供了低功耗睡眠模式，以通過關斷大量內部電路來實現超低的靜態電流消耗。

針對欠壓鎖定、電荷泵故障、過流保護、短路保護和過熱等情況提供內部保護功能，并且 nFAULT 引腳上的故障狀況指示燈和 SPI 寄存器會顯示相關故障。

用戶指南: PDF
TI.com 上無現貨
封裝 引腳 CAD 符號、封裝和 3D 模型
HTSSOP (PWP) 24 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻