產品詳情

Number of DAC channels 4 DAC resolution (bps) 13 Temperature sensing Local, Remote Interface type I2C, SPI Features Built-in sequencing control, EEPROM, High current drive capability Operating temperature range (°C) -40 to 125 Rating Catalog DAC output full-scale (min) (V) -10 DAC output full-scale (max) (V) 10
Number of DAC channels 4 DAC resolution (bps) 13 Temperature sensing Local, Remote Interface type I2C, SPI Features Built-in sequencing control, EEPROM, High current drive capability Operating temperature range (°C) -40 to 125 Rating Catalog DAC output full-scale (min) (V) -10 DAC output full-scale (max) (V) 10
VQFN (RGE) 24 16 mm2 4 x 4
  • Local and remote diode temperature sensor
    • ±2.5°C accuracy, maximum
    • 0.0625°C resolution
  • Internal EEPROM for autonomous operation
    • Four independent transfer functions storage
    • Device configuration storage
    • Open space for user storage
  • Four analog outputs
    • Four monotonic DACs: 1.22-mV resolution
    • Automatically configured output ranges:
      • Positive output voltage: 5.5 V, maximum
      • Negative output voltage: –10 V, minimum
    • High current drive capability:
      • Source up to 100 mA
      • Sink up to 20 mA
    • High capacitive load tolerant: up to 15 μF
  • Gate bias on and off control switches
    • Two programmable off voltages
      • Two auxiliary DACs: 1.22-mV resolution
    • Fast switching time: 50 ns, typical
    • Low resistance: 3 Ω, maximum
  • Built-in sequencing control
  • Internal 2.5-V reference
  • SPI and I2C interfaces: 1.7-V to 3.6-V operation
    • SPI: 4-wire Interface
    • I2C: Eight selectable slave addresses
  • Specified temperature range: –40°C to +125°C
  • Operating temperature range –40°C to +150°C
  • Local and remote diode temperature sensor
    • ±2.5°C accuracy, maximum
    • 0.0625°C resolution
  • Internal EEPROM for autonomous operation
    • Four independent transfer functions storage
    • Device configuration storage
    • Open space for user storage
  • Four analog outputs
    • Four monotonic DACs: 1.22-mV resolution
    • Automatically configured output ranges:
      • Positive output voltage: 5.5 V, maximum
      • Negative output voltage: –10 V, minimum
    • High current drive capability:
      • Source up to 100 mA
      • Sink up to 20 mA
    • High capacitive load tolerant: up to 15 μF
  • Gate bias on and off control switches
    • Two programmable off voltages
      • Two auxiliary DACs: 1.22-mV resolution
    • Fast switching time: 50 ns, typical
    • Low resistance: 3 Ω, maximum
  • Built-in sequencing control
  • Internal 2.5-V reference
  • SPI and I2C interfaces: 1.7-V to 3.6-V operation
    • SPI: 4-wire Interface
    • I2C: Eight selectable slave addresses
  • Specified temperature range: –40°C to +125°C
  • Operating temperature range –40°C to +150°C

The AFE10004 is a highly integrated, autonomous, power-amplifier (PA) precision analog front end (AFE) that includes four temperature compensation digital-to-analog converters (DACs), integrated EEPROM, and gate bias switches. The four DACs are programmed by four, independent, user-defined, temperature-to-voltage transfer functions stored in the internal EEPROM, allowing any temperature effects to be corrected without additional external circuitry. After start up, the device operates without intervention from a system controller to provide a complete system for setting and compensating bias voltages in control applications.

The AFE10004 has four gate bias outputs that are switched on and off through dedicated control pins. The gate bias switches are designed for fast response. In combination with the device PA_ON pin, this fast response enables correct power sequencing and protection of depletion-mode transistors, such as GaAs and GaN.

The function integration and wide operating temperature range make the AFE10004 an excellent choice as an all-in-one, autonomous bias control circuit for the power amplifiers found in RF systems. The flexible DAC output ranges and built-in sequencing features let the device be used as a biasing controller for a large variety of transistor technologies, such as LDMOS, GaAs, and GaN. Contact TI sales for the full data sheet.

The AFE10004 is a highly integrated, autonomous, power-amplifier (PA) precision analog front end (AFE) that includes four temperature compensation digital-to-analog converters (DACs), integrated EEPROM, and gate bias switches. The four DACs are programmed by four, independent, user-defined, temperature-to-voltage transfer functions stored in the internal EEPROM, allowing any temperature effects to be corrected without additional external circuitry. After start up, the device operates without intervention from a system controller to provide a complete system for setting and compensating bias voltages in control applications.

The AFE10004 has four gate bias outputs that are switched on and off through dedicated control pins. The gate bias switches are designed for fast response. In combination with the device PA_ON pin, this fast response enables correct power sequencing and protection of depletion-mode transistors, such as GaAs and GaN.

The function integration and wide operating temperature range make the AFE10004 an excellent choice as an all-in-one, autonomous bias control circuit for the power amplifiers found in RF systems. The flexible DAC output ranges and built-in sequencing features let the device be used as a biasing controller for a large variety of transistor technologies, such as LDMOS, GaAs, and GaN. Contact TI sales for the full data sheet.

下載 觀看帶字幕的視頻 視頻

申請了解更多信息

可提供完整數據表和其他設計資源。立即申請

您可能感興趣的相似產品

open-in-new 比較替代產品
功能與比較器件相似
AFE20408 正在供貨 具有輸出開關和電流傳感器的八通道功率放大器監視器和控制器 Integrated current-shunt monitor and higher channel density

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 3
類型 標題 下載最新的英語版本 日期
* 數據表 AFE10004 4-Channel Power-Amplifier Precision Analog Front End With Integrated EEPROM and Gate Bias Switches 數據表 PDF | HTML 2020年 12月 8日
EVM 用戶指南 AFE10004 評估模塊 (Rev. A) PDF | HTML 英語版 (Rev.A) PDF | HTML 2025年 8月 23日
應用手冊 Temperature Compensation of Power Amplifier FET Bias Voltages PDF | HTML 2021年 4月 29日

設計和開發

如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。

軟件開發套件 (SDK)

PCM-3P-PC802 RANsemi small cell reference design

RANsemi small cell reference design
支持的產品和硬件

支持的產品和硬件

產品
集成型精密 ADC 和 DAC
AFE10004 具有 EEPROM 和輸出開關的 4 通道功率放大器監視器和控制器
基于 Arm 的處理器
AM6412 雙核 64 位 Arm? Cortex?-A53,單核 Cortex-R5F,具有 PCIe、USB 3.0 和安全性
射頻全差分放大器 (FDA)
LMH9135 具有集成平衡-非平衡變壓器的 3.2GHz 至 4.2GHz 差分至單端放大器
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用,包括業內超大的模型庫之一,涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
封裝 引腳 CAD 符號、封裝和 3D 模型
VQFN (RGE) 24 Ultra Librarian

訂購和質量

包含信息:
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息:
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻