3.1.1 Setup for DEVRAM Output File

Use the steps that follow to setup the output file of the DEVRAM memory.

1. Change the code range to the DEVRAM memory space:
   1. Right click on Target 1 in the project window, and select Options for Target.
   2. Go to the BL51 Locate tab, and modify the Code Range to go from 0x2000–0x3FFF.
2. Copy the following text to the Code box:
?pr?external1_ISR?PGA450_isrs (0X2100), ?pr?timer0_ISR?PGA450_isrs (0X2400), ?pr?timer1_ISR?PGA450_isrs (0X2800), ?pr?serial_ISR?PGA450_isrs (0X2C00), ?pr?linPID_ISR?PGA450_isrs (0X3000), ?pr?linSciRxData_ISR?PGA450_isrs (0X3400), ?pr?linSciTxData_ISR?PGA450_isrs (0X3800), ?pr?external0_ISR?PGA450_isrs (0X3900), ?pr?linSync_ISR?PGA450_isrs (0X3D00)
3. Comment out the OTP section in STARTUP.A51, and remove the comments from the DEVRAM section.