SLAZ102AB October 2012 – May 2021 CC430F6137
- 1Functional Advisories
- 2Preprogrammed Software Advisories
- 3Debug Only Advisories
- 4Fixed by Compiler Advisories
- 5Nomenclature, Package Symbolization, and Revision Identification
-
6Advisory Descriptions
- 6.1 ADC24
- 6.2 ADC25
- 6.3 ADC27
- 6.4 ADC29
- 6.5 ADC42
- 6.6 ADC69
- 6.7 AES1
- 6.8 BSL7
- 6.9 COMP4
- 6.10 COMP10
- 6.11 CPU18
- 6.12 CPU20
- 6.13 CPU21
- 6.14 CPU22
- 6.15 CPU23
- 6.16 CPU24
- 6.17 CPU25
- 6.18 CPU26
- 6.19 CPU27
- 6.20 CPU28
- 6.21 CPU29
- 6.22 CPU30
- 6.23 CPU31
- 6.24 CPU32
- 6.25 CPU33
- 6.26 CPU34
- 6.27 CPU35
- 6.28 CPU39
- 6.29 CPU40
- 6.30 CPU46
- 6.31 CPU47
- 6.32 DMA4
- 6.33 DMA7
- 6.34 DMA8
- 6.35 DMA10
- 6.36 EEM8
- 6.37 EEM9
- 6.38 EEM11
- 6.39 EEM13
- 6.40 EEM14
- 6.41 EEM16
- 6.42 EEM17
- 6.43 EEM19
- 6.44 EEM23
- 6.45 FLASH29
- 6.46 FLASH31
- 6.47 FLASH37
- 6.48 JTAG20
- 6.49 JTAG26
- 6.50 JTAG27
- 6.51 LCDB1
- 6.52 LCDB3
- 6.53 LCDB4
- 6.54 LCDB5
- 6.55 LCDB6
- 6.56 MPY1
- 6.57 PMAP1
- 6.58 PMM8
- 6.59 PMM9
- 6.60 PMM10
- 6.61 PMM11
- 6.62 PMM12
- 6.63 PMM14
- 6.64 PMM15
- 6.65 PMM17
- 6.66 PMM18
- 6.67 PMM20
- 6.68 PORT15
- 6.69 PORT16
- 6.70 PORT17
- 6.71 PORT19
- 6.72 PORT21
- 6.73 RF1A1
- 6.74 RF1A2
- 6.75 RF1A3
- 6.76 RF1A5
- 6.77 RF1A6
- 6.78 RF1A8
- 6.79 RTC3
- 6.80 RTC6
- 6.81 SYS16
- 6.82 TAB23
- 6.83 UCS6
- 6.84 UCS7
- 6.85 UCS9
- 6.86 UCS10
- 6.87 UCS11
- 6.88 USCI26
- 6.89 USCI30
- 6.90 USCI31
- 6.91 USCI34
- 6.92 USCI35
- 6.93 USCI39
- 6.94 USCI40
- 6.95 WDG4
- 7Revision History
6.48 JTAG20
JTAG Module
Category
Software in ROM
Function
BSL does not exit to application code
Description
The methods used to exit the BSL per MSP430 Programming Via the Bootstrap Loader (SLAU319) are invalid.
Workaround
To exit the BSL one of the following methods must be used.
- A Power cycle
or
- Toggle the TEST pin twice when nRST is high and after 50us pull nRST low.
Note: This toggling of TEST pins is not subject to timing constraints. The appropriate level transitions on TEST pin, followed by a RST pulse after 50us, are sufficient to trigger an exit from BSL mode.