SBAK035 January 2025 ADC168M102R-SEP
Pre- and post-TID exposure testing was done with data collected on all critical parameters. All tested parameters were found to be within data sheet specifications during both pre- and post-testing.
Parameter | Units | Lower Limit | Upper Limit |
|---|---|---|---|
| 46000001:AVDD_max_supply | mA | 5 | 25 |
| 46000003:DVDD_max_supply | mA | 1 | 13 |
| 46000004:AVDD_nap_max_supply | uA | 0 | 6200 |
| 46000006:DVDD_nap_max_supply | uA | -5 | 20 |
| 46000007:AVDD_pd_max_supply | nA | 150000 | |
| 33000001:offset_A | mV | -2.5 | 2.5 |
| 33000002:gain_A | % | -0.15 | 0.15 |
| 33000004:offset_B | mV | -2.5 | 2.5 |
| 33000005:gain_B | % | -0.15 | 0.15 |
| 33000003:cmrr_A | dB | ||
| 33000006:cmrr_B | dB | ||
| 43000001:SFDR_A | dB | -89 | |
| 43000002:THD_A | dB | -90 | |
| 43000003:SNR_A | dB | 89 | |
| 43000004:SINAD_A | dB | 88 | |
| 44000001:SFDR_B | dB | -89 | |
| 44000002:THD_B | dB | -90 | |
| 44000003:SNR_B | dB | 89 | |
| 44000004:SINAD_B | dB | 88 | |
| 26000002:DNL_max_A | LSB | -2 | 2 |
| 26000004:DNL_min_A | LSB | -2 | 2 |
| 26000001:INL_max_A | LSB | -4 | 4 |
| 26000003:INL_min_A | LSB | -4 | 4 |
| 26000006:DNL_max_B | LSB | -2 | 2 |
| 26000008:DNL_min_B | LSB | -2 | 2 |
| 26000005:INL_max_B | LSB | -4 | 4 |
| 26000007:INL_min_B | LSB | -4 | 4 |
| 29000008:internalRef1_FS | V | 2.485 | 2.54 |
| 29000011:internalRef2_FS | V | 2.485 | 2.54 |
| 53000001:AVDD_3_6V | mA | 5 | 18 |
| 53000003:DVDD_3_6V | mA | 1 | 10 |
| 53000004:AVDD_nap_3_6V | uA | 0 | 2000 |