SLUSDV5B October 2019 – April 2020 UCC5304
PRODUCTION DATA.
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| SUPPLY CURRENTS | ||||||
| IVCCI | VCCI quiescent current | VIN = 0 V | 1.5 | 2.0 | mA | |
| IVDD | VDD quiescent current | VIN = 0 V, | 1.0 | 1.8 | mA | |
| IVCCI | VCCI operating current | (f = 500 kHz) operating current | 2.5 | mA | ||
| IVDD | VDD operating current | (f = 500 kHz) operating current COUT = 100 pF,
VVDD = 12 V |
2.5 | mA | ||
| VCC SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDS | ||||||
| VVCCI_ON | UVLO Rising threshold | 2.55 | 2.7 | 2.85 | V | |
| VVCCI_OFF | UVLO Falling threshold | 2.35 | 2.5 | 2.65 | V | |
| VVCCI_HYS | UVLO Threshold hysteresis | 0.2 | V | |||
| VDD SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDS | ||||||
| VVDD | UVLO Rising threshold | 5.0 | 5.5 | 5.9 | V | |
| VVDD_OFF | UVLO Falling threshold | 4.7 | 5.2 | 5.6 | V | |
| VVDD_HYS | UVLO Threshold hysteresis | 0.3 | V | |||
| IN | ||||||
| VINH | Input high threshold voltage | 1.6 | 1.8 | 2 | V | |
| VINL | Input low threshold voltage | 0.8 | 1 | 1.25 | V | |
| VIN_HYS | Input threshold hysteresis | 0.8 | V | |||
| OUTPUT | ||||||
| IO+ | Peak output source current | CVDD = 10 µF, CLOAD = 0.18 µF, f = 1 kHz, bench measurement | 4 | A | ||
| IO- | Peak output sink current | CVDD = 10 µF, CLOAD = 0.18 µF, f = 1 kHz, bench measurement | 6 | A | ||
| ROH | Output resistance at high state | IOUT = –10 mA, ROHA, ROHBdo not represent drive pull-up performance. See tRISE in Switching Characteristics and Output Stage for more details. | 5 | Ω | ||
| ROL | Output resistance at low state | IOUT = 10 mA | 0.55 | Ω | ||
| VOH | Output voltage at high state | VVDD = 12 V, IOUT = –10 mA | 11.95 | V | ||
| VOL | Output voltage at low state | VVDD = 12 V, IOUT = 10 mA | 5.5 | mV | ||
| VOAPD | Driver output (VOUT) active pull down | VVDD, IOUT = 200 mA | 1.75 | 2.1 | V | |