• All MOSFET control outputs have 0.2A drive capability.
• The control outputs are configured as P-MOS and N-MOS totem poles with typical R_DS(on) 20Ω and 10Ω, accordingly.
• The control outputs are capable of charging 100pF capacitor within 12ns and discharge within 8ns.
• The amplitude of output control pulses is equal to V_DD.
• Control outputs are designed to be used with external gate MOSFET/IGBT drivers.
• The design is optimized to prevent the latch-up of outputs and verified by extensive tests.

The UCC2895x-Q1 controlers has outputs OUTA, OUTB driving the active leg, initiating the duty cycle leg of power MOSFETs in a phase-shifted full bridge power stage, and outputs OUTC, OUTD driving the passive leg, completing the duty cycle leg, as it is shown in the typical timing diagram in Figure 7-1. Outputs OUTE and OUTF are optimized to drive the synchronous rectifier MOSFETs (see Figure 7-3). These outputs have 200mA peak-current capabilities and are designed to drive relatively small capacitive loads like inputs of external MOSFET or IGBT drivers. Recommended load capacitance should not exceed 100pF. The amplitude of the output signal is equal to the V_DD voltage.