| UCC27531DBV |
| 1 |
EN |
I |
Enable (Pull EN to GND to disable output, pull it high or leave open to enable output) |
| 2 |
IN |
I |
Driver non-inverting input |
| 3 |
VDD |
I |
Bias supply input |
| 4 |
GND |
- |
Ground (all signals are referenced to this node) |
| 5 |
OUTL |
O |
5-A sink current output of driver |
| 6 |
OUTH |
O |
2.5-A Source Current Output of driver |
| UCC27533DBV |
| 1 |
VDD |
I |
Bias supply input |
| 2 |
GND |
- |
Ground (All signals are referenced to this node) |
| 3 |
IN+ |
I |
Driver non-inverting input |
| 4 |
IN- |
I |
Driver inverting input |
| 5 |
OUT |
O |
2.5-A source and 5-A sink current output of driver |
| UCC27536DBV |
| 1 |
EN |
I |
Enable (pull EN to GND to disable output, pull it high or leave open to enable output) |
| 2 |
GND |
- |
Ground (all signals are referenced to this node) |
| 3 |
IN- |
I |
Driver inverting input |
| 4 |
OUT |
O |
2.5-A source and 2.5-A sink current output of driver |
| 5 |
VDD |
I |
Bias supply input |
| UCC27537DBV |
| 1 |
EN |
I |
Enable (Pull EN to GND to disable Output, Pull it high or leave open to enable Output) |
| 2 |
GND |
- |
Ground (All signals are referenced to this node) |
| 3 |
IN+ |
I |
Driver non-inverting input |
| 4 |
OUT |
O |
2.5-A source and 5-A sink current output of driver |
| 5 |
VDD |
I |
Bias supply input |
| UCC27538DBV |
| 1 |
VDD |
I |
Bias supply input |
| 2 |
IN1 |
I |
Driver non-inverting input |
| 3 |
GND |
- |
Ground (all signals are referenced to this node) |
| 4 |
OUTL |
O |
5-A sink current output of driver |
| 5 |
IN2 |
I |
Driver non-inverting input |
| 6 |
OUTH |
O |
2.5-A source current output of driver |
| UCC27531D |
| 1 |
NC |
- |
No connection |
| 2 |
IN |
I |
Driver non-inverting input |
| 3 |
GND |
- |
Ground (all signals are referenced to this node) |
| 4 |
NC |
- |
No connection |
| 5 |
NC |
- |
No connection |
| 6 |
VDD |
I |
Bias supply input |
| 7 |
OUT |
O |
5-A Sink Current Output of driver and 2.5-A Source Current Output of driver |
| 8 |
NC |
- |
No connection |
