ZHCSIF6D March 2008 – November 2023 UCC27324-Q1
PRODUCTION DATA
- 1
- 1 特性
- 2 應用
- 3 說明
- 4 Pin Configuration and Functions
-
5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Thermal Information
- 5.5 Overall Electrical Characteristics
- 5.6 Power Dissipation Characteristics
- 5.7 Input (INA, INB) Electrical Characteristics
- 5.8 Output (OUTA, OUTB) Electrical Characteristics
- 5.9 Switching Characteristics
- 5.10 Typical Characteristics
- 6 Detailed Description
- 7 Application and Implementation
- 8 Power Supply Recommendations
- 9 Layout
- 10Device and Documentation Support
- 11Revision History
- 12Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
- D|8
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
4 Pin Configuration and Functions
NC – No internal connection
Figure 4-1 D Package8-Pin SOICTop ViewTable 4-1 Pin Functions
| PIN | I/O | DESCRIPTION | |
|---|---|---|---|
| NO. | NAME | ||
| 1 | NC | — | No connection. Should be grounded. |
| 2 | INA | I | Input A. Input signal of the A driver. Has logic-compatible threshold and hysteresis. If not used, this input should be tied to either VDD or GND. It should not be left floating. |
| 3 | GND | — | Common ground. Should be connected very closely to the source of the power MOSFET that the driver is driving. |
| 4 | INB | I | Input B. Input signal of the B driver. Has logic-compatible threshold and hysteresis. If not used, this input should be tied to either VDD or GND. It should not be left floating. |
| 5 | OUTB | O | Driver output B. The output stage can provide 4-A drive current to the gate of a power MOSFET. |
| 6 | VDD | I | Supply. Supply voltage and the power input connection for this device. |
| 7 | OUTA | O | Driver output A. The output stage can provide 4-A drive current to the gate of a power MOSFET. |
| 8 | NC | — | No connection. Should be grounded. |