To achieve optimal electrical and thermal performance, an optimized PCB layout is required. Figure 10-1 and Figure 10-2 show a typical PCB layout. Some considerations for an optimized layout are:
- Use large copper areas for power planes (VIN,
VOUT, and PGND) to minimize conduction loss and thermal stress.
- Connect all PGND pins together using copper
plane.
- Connect the AGND pin to the PGND copper at a
single point near the pin.
- Place ceramic input and output capacitors close to the device pins to minimize high frequency noise.
- Locate additional output capacitors between the ceramic capacitor and the load.
- Place RFBT and RFBB as close as possible to their respective pins.
- Use multiple vias to connect the power planes to internal layers.