ZHCSB84F November 2011 – November 2021 TPS62130 , TPS62130A , TPS62131 , TPS62132 , TPS62133
PRODUCTION DATA
The external components have to fulfill the needs of the application, but also the stability criteria of the devices control loop. The TPS6213x is optimized to work within a range of external components. The inductance of the LC output filter and capacitance have to be considered together, creating a double pole, responsible for the corner frequency of the converter (see Section 9.2.2.4). Table 9-2 can be used to simplify the output filter component selection. Checked cells represent combinations that are proven for stability by simulation and lab test. Further combinations should be checked for each individual application. See Optimizing the TPS62130/40/50/60 Output Filter Application Report for details.
| 4.7 μF | 10 μF | 22 μF | 47 μF | 100 μF | 200 μF | 400 μF | |
|---|---|---|---|---|---|---|---|
| 0.47 μH(1) | |||||||
| 1 μH(1) | √ | √ | √ | √ | |||
| 2.2 μH(1) | √ | √(2) | √ | √ | √ | ||
| 3.3 μH(1) | √ | √ | √ | √ | |||
| 4.7 μH(1) |
The TPS6213x can be run with an inductor as low as 1 μH. FSW should be set Low in this case. However, for applications running with the low frequency setting (FSW = High) or with low input voltages, 2.2 μH is recommended.