7.1 Absolute Maximum Ratings(1)
over operating free-air temperature range, voltage are referenced to GND (unless otherwise noted)
|
MIN |
MAX |
UNIT |
|
A, C, FLTR, VDD, STAT voltage |
–0.3 |
18 |
V |
|
A above C voltage(3) |
|
7.5 |
V |
|
C above A voltage |
|
18 |
V |
|
GATE(2), BYP voltage |
–0.3 |
30 |
V |
|
BYP(2) to A voltage |
–0.3 |
13 |
V |
|
GATE above BYP voltage |
|
0.3 |
V |
|
FLTR(2) to C voltage |
–0.3 |
0.3 |
V |
|
OV, UV voltage |
–0.3 |
5.5 |
V |
|
RSET voltage(2) |
–0.3 |
7 |
V |
|
FLTB, PG voltage |
–0.3 |
18 |
V |
|
STAT, PG, FLTB sink current |
|
40 |
mA |
|
GATE short to A or C or GND |
Indefinite |
|
| TJ |
Maximum junction temperature |
Internally limited |
°C |
| Tstg |
Storage temperature |
–65 |
150 |
°C |
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Voltage should not be applied to these pins.
(3) See the section "Bidirectional Blocking and Protection of C."