SLVSH99A December 2023 – August 2025 TPS22996
PRODUCTION DATA
- 1
- 1 Features
- 2 Applications
- 3 Description
- 4 Device Comparison Table
- 5 Pin Configuration and Functions
- 6 Specifications
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Device and Documentation Support
- 11Revision History
- 12Mechanical, Packaging, and Orderable Information
5 Pin Configuration and Functions
Figure 5-1 DRL
Package,8-Pin SOT(Top View)Pin Functions
| PIN | I/O | DESCRIPTION | |
|---|---|---|---|
| NO. | NAME | ||
| 1 | ON1 | I | Active-high switch 1 control input. Connect series resistor to set slew rate. Do not leave floating. |
| 2 | VIN1 | I | Switch 1 input. Recommended voltage range for these pins for optimal RON performance is 0.6V to VBIAS. Place an optional decoupling capacitor between these pins and GND to reduce VIN1 dip during turnon of the channel. |
| 3 | VIN2 | I | Switch 2 input. Recommended voltage range for these pins for optimal RON performance is 0.6V to VBIAS. Place an optional decoupling capacitor between these pins and GND to reduce VIN1 dip during turnon of the channel. |
| 4 | ON2 | I | Active-high switch 2 control input. Connect series resistor to set Slew Rate. Do not leave floating. |
| 5 | GND | I | Device ground. |
| 6 | VOUT2 | I | Switch 2 output. |
| 7 | VOUT1 | I | Switch 1 output. |
| 8 | VBIAS | I | Bias voltage. Power supply to the device. Recommended voltage range for this pin is 2.5V to 5.5V. |