ZHCSSW6 august 2023 TMUX121
PRODUCTION DATA
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| IDDQ | VDD quiescent supply current | EN = VDD | 1.3 | 4 | μA | |
| IDD | VDD supply current | EN = 0 V | 11 | 30 | μA | |
| RON | On-resistance | VS = 0 V , IS = –8 mA | 3 | 5.4 | Ω | |
| VS = 2.4 V , IS = –8 mA | 3.9 | 8 | Ω | |||
| ΔRON | On-resistance mismatch between channels | VS = 0 V , IS = –8 mA | 0.5 | Ω | ||
| VS = 2.4 V , IS = –8 mA | 0.5 | Ω | ||||
| RON FLAT | On-resistance flatness | VS = 0 V and VS = 2.4 V; IS = –8 mA | 1 | Ω | ||
| IS(ON) ID(ON) |
Channel on leakage current (Sx, Dx) | Switch state is on VD = VS = 3.6 V |
2 | μA | ||
| Switch state is on VD = VS = 0 V |
0.2 | μA | ||||
| IS(OFF) | Source off leakage current (Sx) | Switch state is off VS = 3.6 V |
2 | μA | ||
| ID(OFF) | Drain off leakage current (Dx) | Switch state is off VD = 3.6 V |
2 | μA | ||
| I(POFF) | Powered-off leakage current (Sx, Dx) | VCC = 0 V, VD or VS = 3.6 V | 10 | μA | ||
| VIH | Logic voltage high (EN, SEL) | 1.4 | 3.6 | V | ||
| VIL | Logic voltage low (EN, SEL) | 0 | 0.4 | |||
| IIL | Input leakage current (EN, SEL) | 0.2 | μA | |||
| IIH | Input leakage current (EN, SEL) | 1 | μA | |||
| IIH | Failsafe Input leakage current (EN, SEL) | VCC = 0 V, VEN or VSEL = 3.6 V | 10 | μA | ||