ZHCSBS0C October   2013  – January 2015 TMS570LS3137-EP

PRODUCTION DATA.  

1. 1器件概述
   1. 1.1 特性
   2. 1.2 應用范圍
   3. 1.3 說明
   4. 1.4 功能方框圖
2. 2修訂歷史記錄
3. 3Device Comparison Table
   1. 3.1 Device Comparison
4. 4Pin Configuration and Functions
   1. 4.1 Pin Diagrams
      1. 4.1.1 Pin Attributes
         1. 4.1.1.1 GWT Package
            1. 4.1.1.1.1  Multi-Buffered Analog-to-Digital Converters (MibADC)
            2. 4.1.1.1.2  Enhanced High-End Timer Modules (N2HET)
            3. 4.1.1.1.3  General-Purpose Input / Output (GPIO)
            4. 4.1.1.1.4  FlexRay Interface Controller (FlexRay)
            5. 4.1.1.1.5  Controller Area Network Controllers (DCAN)
            6. 4.1.1.1.6  Local Interconnect Network Interface Module (LIN)
            7. 4.1.1.1.7  Standard Serial Communication Interface (SCI)
            8. 4.1.1.1.8  Inter-Integrated Circuit Interface Module (I2C)
            9. 4.1.1.1.9  Standard Serial Peripheral Interface (SPI)
            10. 4.1.1.1.10 Multi-Buffered Serial Peripheral Interface Modules (MibSPI)
            11. 4.1.1.1.11 Ethernet Controller
            12. 4.1.1.1.12 External Memory Interface (EMIF)
            13. 4.1.1.1.13 Embedded Trace Macrocell for Cortex-R4F CPU (ETM-R4F)
            14. 4.1.1.1.14 RAM Trace Port (RTP)
            15. 4.1.1.1.15 Data Modification Module (DMM)
            16. 4.1.1.1.16 System Module Interface
            17. 4.1.1.1.17 Clock Inputs and Outputs
            18. 4.1.1.1.18 Test and Debug Modules Interface
            19. 4.1.1.1.19 Flash Supply and Test Pads
            20. 4.1.1.1.20 No Connects
            21. 4.1.1.1.21 Supply for Core Logic: 1.2V nominal
            22. 4.1.1.1.22 Supply for I/O Cells: 3.3V nominal
            23. 4.1.1.1.23 Ground Reference for All Supplies Except VCCAD
5. 5Specifications
   1. 5.1  Absolute Maximum Ratings
   2. 5.2  ESD Ratings
   3. 5.3  Power-On Hours (POH)
   4. 5.4  Recommended Operating Conditions
   5. 5.5  Power Consumption
   6. 5.6  Thermal Data
   7. 5.7  Switching Characteristics
   8. 5.8  Wait States Required
   9. 5.9  I/O Electrical Characteristics
   10. 5.10 Output Buffer Drive Strengths
   11. 5.11 Input Timings
   12. 5.12 Output Timings
   13. 5.13 Low-EMI Output Buffers
6. 6System Information and Electrical Specifications
   1. 6.1  Device Power Domains
   2. 6.2  Voltage Monitor Characteristics
      1. 6.2.1 Important Considerations
      2. 6.2.2 Voltage Monitor Operation
      3. 6.2.3 Supply Filtering
   3. 6.3  Power Sequencing and Power On Reset
      1. 6.3.1 Power-Up Sequence
      2. 6.3.2 Power-Down Sequence
      3. 6.3.3 Power-On Reset: nPORRST
         1. 6.3.3.1 nPORRST Electrical and Timing Requirements
   4. 6.4  Warm Reset (nRST)
      1. 6.4.1 Causes of Warm Reset
      2. 6.4.2 nRST Timing Requirements
   5. 6.5  ARM© Cortex-R4F CPU Information
      1. 6.5.1 Summary of ARM Cortex-R4F CPU Features
      2. 6.5.2 ARM Cortex-R4F CPU Features Enabled by Software
      3. 6.5.3 Dual Core Implementation
      4. 6.5.4 Duplicate Clock Tree After GCLK
      5. 6.5.5 ARM Cortex-R4F CPU Compare Module (CCM-R4) for Safety
      6. 6.5.6 CPU Self-Test
         1. 6.5.6.1 Application Sequence for CPU Self-Test
         2. 6.5.6.2 CPU Self-Test Clock Configuration
         3. 6.5.6.3 CPU Self-Test Coverage
   6. 6.6  Clocks
      1. 6.6.1 Clock Sources
         1. 6.6.1.1 Main Oscillator
            1. 6.6.1.1.1 Timing Requirements for Main Oscillator
         2. 6.6.1.2 Low Power Oscillator (LPO)
            1. 6.6.1.2.1 Features
            2. 6.6.1.2.2 LPO Electrical and Timing Specifications
         3. 6.6.1.3 Phase Locked Loop (PLL) Clock Modules
            1. 6.6.1.3.1 Block Diagram
            2. 6.6.1.3.2 PLL Timing Specifications
         4. 6.6.1.4 External Clock Inputs
      2. 6.6.2 Clock Domains
         1. 6.6.2.1 Clock Domain Descriptions
         2. 6.6.2.2 Mapping of Clock Domains to Device Modules
      3. 6.6.3 Clock Test Mode
   7. 6.7  Clock Monitoring
      1. 6.7.1 Clock Monitor Timings
      2. 6.7.2 External Clock (ECLK) Output Functionality
      3. 6.7.3 Dual Clock Comparators
         1. 6.7.3.1 Features
         2. 6.7.3.2 Mapping of DCC Clock Source Inputs
   8. 6.8  Glitch Filters
   9. 6.9  Device Memory Map
      1. 6.9.1 Memory Map Diagram
      2. 6.9.2 Memory Map Table
      3. 6.9.3 Master/Slave Access Privileges
         1. 6.9.3.1 Special Notes on Accesses to Certain Slaves
      4. 6.9.4 POM Overlay Considerations
   10. 6.10 Flash Memory
       1. 6.10.1 Flash Memory Configuration
       2. 6.10.2 Main Features of Flash Module
       3. 6.10.3 ECC Protection for Flash Accesses
       4. 6.10.4 Flash Access Speeds
       5. 6.10.5 Flash Program and Erase Timings for Program Flash
       6. 6.10.6 Flash Program and Erase Timings for Data Flash
   11. 6.11 Tightly-Coupled RAM Interface Module
       1. 6.11.1 Features
       2. 6.11.2 TCRAMW ECC Support
   12. 6.12 Parity Protection for Peripheral RAMs
   13. 6.13 On-Chip SRAM Initialization and Testing
       1. 6.13.1 On-Chip SRAM Self-Test Using PBIST
          1. 6.13.1.1 Features
          2. 6.13.1.2 PBIST RAM Groups
       2. 6.13.2 On-Chip SRAM Auto Initialization
   14. 6.14 External Memory Interface (EMIF)
       1. 6.14.1 Features
       2. 6.14.2 Electrical and Timing Specifications
          1. 6.14.2.1 Asynchronous RAM
          2. 6.14.2.2 Synchronous Timing
   15. 6.15 Vectored Interrupt Manager
       1. 6.15.1 VIM Features
       2. 6.15.2 Interrupt Request Assignments
   16. 6.16 DMA Controller
       1. 6.16.1 DMA Features
       2. 6.16.2 Default DMA Request Map
   17. 6.17 Real Time Interrupt Module
       1. 6.17.1 Features
       2. 6.17.2 Block Diagrams
       3. 6.17.3 Clock Source Options
       4. 6.17.4 Network Time Synchronization Inputs
   18. 6.18 Error Signaling Module
       1. 6.18.1 Features
       2. 6.18.2 ESM Channel Assignments
   19. 6.19 Reset / Abort / Error Sources
   20. 6.20 Digital Windowed Watchdog
   21. 6.21 Debug Subsystem
       1. 6.21.1  Block Diagram
       2. 6.21.2  Debug Components Memory Map
       3. 6.21.3  JTAG Identification Code
       4. 6.21.4  Debug ROM
       5. 6.21.5  JTAG Scan Interface Timings
       6. 6.21.6  Advanced JTAG Security Module
       7. 6.21.7  Embedded Trace Macrocell (ETM-R4)
          1. 6.21.7.1 ETM TRACECLKIN Selection
          2. 6.21.7.2 Timing Specifications
       8. 6.21.8  RAM Trace Port (RTP)
          1. 6.21.8.1 Features
          2. 6.21.8.2 Timing Specifications
       9. 6.21.9  Data Modification Module (DMM)
          1. 6.21.9.1 Features
          2. 6.21.9.2 Timing Specifications
       10. 6.21.10 Boundary Scan Chain
7. 7Peripheral Information
   1. 7.1  Peripheral Legend
   2. 7.2  Multi-Buffered 12bit Analog-to-Digital Converter
      1. 7.2.1 Features
      2. 7.2.2 Event Trigger Options
         1. 7.2.2.1 Default MIBADC1 Event Trigger Hookup
         2. 7.2.2.2 Alternate MIBADC1 Event Trigger Hookup
         3. 7.2.2.3 Default MIBADC2 Event Trigger Hookup
         4. 7.2.2.4 Alternate MIBADC2 Event Trigger Hookup
      3. 7.2.3 ADC Electrical and Timing Specifications
      4. 7.2.4 Performance (Accuracy) Specifications
         1. 7.2.4.1 MibADC Nonlinearity Errors
         2. 7.2.4.2 MibADC Total Error
   3. 7.3  General-Purpose Input/Output
      1. 7.3.1 Features
   4. 7.4  Enhanced High-End Timer (N2HET)
      1. 7.4.1 Features
      2. 7.4.2 N2HET RAM Organization
      3. 7.4.3 Input Timing Specifications
      4. 7.4.4 N2HET1-N2HET2 Interconnections
      5. 7.4.5 N2HET Checking
         1. 7.4.5.1 Internal Monitoring
         2. 7.4.5.2 Output Monitoring using Dual Clock Comparator (DCC)
      6. 7.4.6 Disabling N2HET Outputs
      7. 7.4.7 High-End Timer Transfer Unit (HET-TU)
         1. 7.4.7.1 Features
         2. 7.4.7.2 Trigger Connections
   5. 7.5  FlexRay Interface
      1. 7.5.1 Features
      2. 7.5.2 Electrical and Timing Specifications
      3. 7.5.3 FlexRay Transfer Unit
   6. 7.6  Controller Area Network (DCAN)
      1. 7.6.1 Features
      2. 7.6.2 Electrical and Timing Specifications
   7. 7.7  Local Interconnect Network Interface (LIN)
      1. 7.7.1 LIN Features
   8. 7.8  Serial Communication Interface (SCI)
      1. 7.8.1 Features
   9. 7.9  Inter-Integrated Circuit (I2C)
      1. 7.9.1 Features
      2. 7.9.2 I2C I/O Timing Specifications
   10. 7.10 Multi-Buffered / Standard Serial Peripheral Interface
       1. 7.10.1 Features
       2. 7.10.2 MibSPI Transmit and Receive RAM Organization
       3. 7.10.3 MibSPI Transmit Trigger Events
          1. 7.10.3.1 MIBSPI1 Event Trigger Hookup
          2. 7.10.3.2 MIBSPI3 Event Trigger Hookup
          3. 7.10.3.3 MIBSPI5 Event Trigger Hookup
       4. 7.10.4 MibSPI/SPI Master Mode I/O Timing Specifications
       5. 7.10.5 SPI Slave Mode I/O Timings
   11. 7.11 Ethernet Media Access Controller
       1. 7.11.1 Ethernet MII Electrical and Timing Specifications
       2. 7.11.2 Ethernet RMII Timing
       3. 7.11.3 Management Data Input/Output (MDIO)
8. 8Device and Documentation Support
   1. 8.1 Device and Development-Support Tool Nomenclature
   2. 8.2 Documentation Support
      1. 8.2.1 Related Documentation from Texas Instruments
      2. 8.2.2 社區資源
   3. 8.3 商標
   4. 8.4 靜電放電警告
   5. 8.5 術語表
   6. 8.6 Device Identification
      1. 8.6.1 Device Identification Code Register
      2. 8.6.2 Die Identification Registers
   7. 8.7 Module Certifications
9. 9Mechanical, Packaging, and Orderable Information
   1. 9.1 Packaging Information