SLVSFF4 December 2019 TLVH431B-EP
PRODUCTION DATA.
- 1 Features
- 2 Applications
- 3 Description
- 4 Revision History
- 5 Pin Configuration and Functions
- 6 Specifications
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Applications and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12Device and Documentation Support
- 13Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
- DBZ|3
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
6.5 Electrical Characteristics
at –55°C to 125°C free-air temperature (unless otherwise noted)| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|
| VREF | Reference voltage | VKA = VREF,
IK = 10 mA, see Figure 23 |
TA = 25°C | 1.234 | 1.24 | 1.246 | V |
| TA = full range(1) | 1.221 | 1.265 | |||||
| VREF(dev) | VREF deviation(2) | VKA = VREF, IK = 10 mA, see Figure 23 | 11 | 31 | mV | ||
 |
Ratio of VREF change to
cathode voltage change |
IK = 10 mA, VK = VREF to 18 V, see Figure 24 | TA = 25°C | –1.5 | –2.7 | mV/V | |
| Iref | Reference terminal current | IK = 10 mA, R1 = 10 kΩ, R2 = open, see Figure 24 | TA = 25°C | 0.1 | 0.5 | μA | |
| Iref(dev) | Iref deviation(2) | IK = 10 mA, R1 = 10 kΩ, R2 = open,
see Figure 24(1) |
0.15 | 0.5 | μA | ||
| IK(min) | Minimum cathode current for regulation | VKA = VREF, see Figure 23 | TA = 25°C | 60 | 100 | μA | |
| TA = full range(1) | 200 | ||||||
| IK(off) | Off-state cathode current | VREF = 0, VKA = 18 V,
see Figure 25 |
TA = 25°C | 0.02 | 0.1 | μA | |
| TA = full range(1) | 0.7 | ||||||
| |zKA| | Dynamic impedance(3) | VKA = VREF, f ≤ 1 kHz, IK = 0.2 mA to 70 mA, see Figure 23 | TA = 25°C | 0.25 | 0.4 | Ω | |
(1) Full temperature range is –55°C to 125°C.
(2) The deviation parameters VREF(dev) and Iref(dev) are defined as the differences between the maximum and minimum values obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, αVREF, is defined as:
where ΔTA is the rated operating free-air temperature range of the device.
αVREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the lower temperature.
where ΔTA is the rated operating free-air temperature range of the device.
αVREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the lower temperature.
(3) The dynamic impedance is defined as:
When the device is operating with two external resistors (see Figure 24), the total dynamic impedance of the circuit is defined as:
When the device is operating with two external resistors (see Figure 24), the total dynamic impedance of the circuit is defined as: