pacopacomama熟女,亚洲婷婷六月的婷婷,亚洲欧美在线观看品

ZHCSRH9E April 2009 – January 2023 TCA6408A

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

PW|16
- MPDS361B
RSV|16
- MPQF205G
RGT|16
- MPQF119H

散熱焊盤機械數據 (封裝 | 引腳)

RSV|16
- QFND836
RGT|16
- QFND005T

訂購信息

6.5 Electrical Characteristics

over recommended operating free-air temperature range, V_CCI = 1.65 V to 5.5 V (unless otherwise noted)

PARAMETER			TEST CONDITIONS	V_CCP	MIN	TYP⁽¹⁾	MAX	UNIT
V_IK	Input diode clamp voltage		I_I = –18 mA	1.65 V to 5.5 V	–1.2			V
V_POR	Power-on reset voltage⁽²⁾		V_I = V_CCP or GND, I_O = 0	1.65 V to 5.5 V		1	1.4	V
V_OH	P-port high-level output voltage		I_OH = –8 mA	1.65 V	1.2			V
				2.3 V	1.8
				3 V	2.6
				4.5 V	4.1
			I_OH = –10 mA	1.65 V	1.1
				2.3 V	1.7
				3 V	2.5
				4.5 V	4.0
V_OL	P-port low-level output voltage		I_OL = 8 mA	1.65 V			0.45	V
				2.3 V			0.25
				3 V			0.25
				4.5 V			0.2
			I_OL = 10 mA	1.65 V			0.6
				2.3 V			0.3
				3 V			0.25
				4.5 V			0.2
I_OL	SDA		V_OL = 0.4 V	1.65 V to 5.5 V	3			mA
I_OL	INT		V_OL = 0.4 V	1.65 V to 5.5 V	3	15		mA
I_I	SCL, SDA, RESET		V_I = V_CCI or GND	1.65 V to 5.5 V			±0.1	μA
I_I	ADDR		V_I = V_CCP or GND	1.65 V to 5.5 V			±0.1	μA
I_IH	P-port		V_I = V_CCP	1.65 V to 5.5 V			1	μA
I_IL	P-port		V_I = GND	1.65 V to 5.5 V			1	μA
I_CC (I_CCI + I_CCP)	Operating mode	SDA, P-port, ADDR, RESET	V_I on SDA and RESET= V_CCI or GND, V_I on P-port and ADDR = V_CCP or GND, I_O = 0, I/O = inputs, f_SCL = 400 kHz	3.6 V to 5.5 V		10	20	μA
				2.3 V to 3.6 V		6.5	15
				1.65 V to 2.3 V		4	9
	Standby mode	SCL, SDA, P-port, ADDR, RESET	V_I on SCL, SDA and RESET = V_CCI or GND, V_I on P-Port and ADDR = V_CCP or GND, I_O = 0, I/O = inputs, f_SCL = 0	3.6 V to 5.5 V		1.5	7
				2.3 V to 3.6 V		1	3.2
				1.65 V to 2.3 V		0.5	1.7
ΔI_CCI	Additional current in standby mode	SCL, SDA, RESET	One input at V_CCI – 0.6 V, Other inputs at V_CCI or GND	1.65 V to 5.5 V			25	μA
ΔI_CCP	Additional current in standby mode	P-port, ADDR	One input at V_CCP – 0.6 V, Other inputs at V_CCP or GND	1.65 V to 5.5 V			80	μA
C_i	SCL		V_I = V_CCI or GND	1.65 V to 5.5 V		6	7	pF
C_io	SDA		V_IO = V_CCI or GND	1.65 V to 5.5 V		7	8	pF
C_io	P-port		V_IO = V_CCP or GND	1.65 V to 5.5 V		7.5	8.5	pF

(1) All typical values are at nominal supply voltage (1.8-V, 2.5-V, 3.3-V, or 5-V V_CC) and T_A = 25°C.

(2) When power (from 0 V) is applied to V_CCP, an internal power-on reset holds the TCA6408A in a reset condition until V_CCP has reached V_POR. At that time, the reset condition is released, and the TCA6408A registers and I²C/SMBus state machine initialize to their default states. After that, V_CCP must be lowered to below 0.2 V and back up to the operating voltage for a power-reset cycle.