SCES359J August 2001 – October 2015 SN74LVC2G34
PRODUCTION DATA.
請參考 PDF 數據表獲取器件具體的封裝圖。
The power supply can be any voltage between the minimum and maximum supply voltage rating located in the table.
Each VCC pin must have a good bypass capacitor to prevent power disturbance. For devices with a single supply, a 0.1-μF capacitor is recommended and if there are multiple VCC pins then a 0.01-μF or 0.022-μF capacitor is recommended for each power pin. It is ok to parallel multiple bypass caps to reject different frequencies of noise. 0.1-μF and 1-μF capacitors are commonly used in parallel. The bypass capacitor must be installed as close to the power pin as possible for best results.