ZHCS823H March 2012 – March 2019 SN65HVD72 , SN65HVD75 , SN65HVD78
UNLESS OTHERWISE NOTED, this document contains PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 Device Comparison Table
- 6 Pin Configuration and Functions
-
7 Specifications
- 7.1 Absolute Maximum Ratings
- 7.2 ESD Ratings
- 7.3 Recommended Operating Conditions
- 7.4 Thermal Information
- 7.5 Electrical Characteristics
- 7.6 Power Dissipation
- 7.7 Switching Characteristics: 250 kbps Device (SN65HVD72) Bit Time ≥ 4 µs
- 7.8 Switching Characteristics: 20 Mbps Device (SN65HVD75) Bit Time ≥50 ns
- 7.9 Switching Characteristics: 50 Mbps Device (SN65HVD78) Bit Time ≥20 ns
- 7.10 Typical Characteristics
- 8 Parameter Measurement Information
- 9 Detailed Description
- 10Application and Implementation
- 11Power Supply Recommendations
- 12Layout
- 13器件和文檔支持
- 14機械、封裝和可訂購信息
封裝選項
機械數據 (封裝 | 引腳)
散熱焊盤機械數據 (封裝 | 引腳)
- DRB|8
訂購信息
8 Parameter Measurement Information
Input generator rate is 100 kbps, 50% duty cycle, rise or fall time is less than 6 ns, output impedance is 50 Ω.
Figure 10. Measurement of Driver Differential Output Voltage With Common-Mode Load 
Figure 11. Measurement of Driver Differential and Common-Mode Output With RS-485 Load 
Figure 12. Measurement of Driver Differential Output Rise and Fall Times and Propagation Delays 
D at 3 V to test non-inverting output, D at 0 V to test inverting output.
Figure 13. Measurement of Driver Enable and Disable Times With Active High Output and Pulldown Load 
D at 0 V to test non-inverting output, D at 3 V to test inverting output.
Figure 14. Measurement of Driver Enable and Disable Times With Active Low Output and Pullup Load 
Figure 15. Measurement of Receiver Output Rise and Fall Times and Propagation Delays 
Figure 16. Measurement of Receiver Enable and Disable Times With Driver Enabled 
Figure 17. Measurement of Receiver Enable Times With Driver Disabled