精品少妇人妻AV免费久久久,日韩欧美中文亚洲高清在线,久久久久久国产精选av香蕉

ZHCSQM3 December 2022 OPT3005

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

DTS|8
- MPSS136D

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

zhcsqm3_oa

7.5 Electrical Characteristics

All specifications at TA = 25°C, VDD = 3.3 V, 800-ms conversion-time (CT=1)⁽¹⁾, automatic full-scale range (RN[3:0] = 1100b)⁽¹⁾, white LED and normal-angle incidence of light, unless otherwise specified.

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
Optical
	Peak irradiance spectral responsivity				550		nm
	Resolution (LSB)	Lowest full-scale range, RN[3:0]=0000b⁽¹⁾			0.02		lux
	Full-scale illuminance				167731.2		lux
	Measurement Output result	1.28 lux per ADC code, 2620.8 lux full-scale (RN[3:0] = 0101)(1) , 2000 lux input(2)		1250	1563	1875	codes
	Measurement Output result			1600	2000	2400	lux⁽⁷⁾
	Relative accuracy between gain ranges ⁽³⁾				0.2		%
	Infrared response (850nm)⁽²⁾	From -85° to +85° angle of incidence			0.004		%
	Linearity	Input illuminance > 80 lux			2		%
	Linearity	Input illuminance < 80 lux			5		%
	Measurement drift across temperature	Input illuminance = 2000 lux			0.06		%/°C
	Dark Condition ADC output	0.02 lux per ADC Code			0	3	ADC codes
	Half-power-angle	50% of full-power reading			57		degrees
PSRR	Power-supply rejection ratio⁽⁴⁾	VDD at 3.6 V and 1.6 V			0.1		%/V⁽³⁾
POWER SUPPLY
V_DD	Operating Range			1.6		3.6	V
V_I2C	Operating range for I2C pull up resistor	I²C pullup resistor, V_DD ≤ _VI2C		1.6		5.5	V
I_Q	Quiescent current	Dark	Active, Vdd=3.6V		1.8	2.5	μA
		Dark	Shutdown (M[1:0]=00)⁽¹⁾, VDD=3.6V		0.3	0.47	μA
		Full-scale lux	Active, Vdd=3.6V		3.7
		Full-scale lux	Shutdown (M[1:0]=00)⁽¹⁾		0.4
POR	Power-on-reset threshold				0.8		V
DIGITAL
C_IO	I/O Pin Capacitance				3		pF
	Total Integration-time⁽⁵⁾	(CT = 1)⁽¹⁾ , 800-ms mode, fixed lux range		720	800	880	ms
		(CT = 0)⁽¹⁾ , 100-ms mode, fixed lux range		90	100	110	ms
V_IL	Low-level input voltage (SDA, SCL, and ADDR)			0		0.3 X V_DD	V
V_IH	High-level input voltage (SDA, SCL, and ADDR)			0.7 X V_DD		5.5	V
I_IL	Low-level input current (SDA, SCL, and ADDR)				0.01	0.25⁽⁶⁾	μA
V_OL	Low-level output voltage (SDA and INT)	I_OL=3mA				0.32	V
I_ZH	Output logic high, high-Z leakage current (SDA, INT)	Measured with V_DD at pin			0.01	0.25⁽⁶⁾	μA
TEMPERATURE
	Specified temperature range			–40		85	°C

(1) Refers to a control field within the configuration register

(2) Tested with the white LED calibrated to 2k lux and an 850-nm LED

(3) Characterized by measuring fixed near-full-scale light levels on the higher adjacent full-scale range setting.

(4) PSRR is the percent change of the measured lux output from the current value, divided by the change in power supply voltage, as characterized by results from 3.6-V and 1.6-V power supplies.

(5) The conversion-time, from start of conversion until the data are ready to be read, is the integration-time plus 3 ms.

(6) The specified leakage current is dominated by the production test equipment limitations. Typical values are much smaller

(7) equivalent lux measured with white LED @ around 4000K