6.1 Absolute Maximum Ratings
Over operating free-air temperature range (unless otherwise noted)(1)
|
MIN |
MAX |
UNIT |
| Differential Input Voltage |
|
± Supply Voltage |
V |
| Output Short Circuit Duration |
|
See (2)
|
|
| Supply Voltage (V+ - V−) |
|
6 |
V |
| SOLDERING INFORMATION |
| Infrared or Convection (20 sec) |
|
235 |
°C |
| Wave Soldering (10 sec) |
|
260 (lead temp) |
°C |
| Voltage at Input/Output Pins |
|
(V+) +0.3, (V−) −0.3 |
V |
| Current at Input Pin (3)
|
|
±10 |
mA |
| Storage Temperature, Tstg
|
–65 |
150 |
°C |
| Junction Temperature,TJ
|
|
150 |
°C |
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150°C. Output currents in excess of ±30mA over long term may adversely affect reliability.
(3) Limiting input pin current is only necessary for input voltages that exceed absolute maximum input voltage ratings.