over operating temperature range (unless otherwise noted)(1) | MIN | MAX | UNIT |
|---|
| Supply voltage, ([V+] – [V–]) | 0 | 6 | V |
| Signal input pins | Voltage(2) | Common-mode | (V–) – 0.5 | (V+) + 0.5 | V |
| Differential(4) | | (V+) – (V–) + 0.2 | V |
| Current(2) | –10 | 10 | mA |
| Output short-circuit(3) | Continuous |
| Operating, TA | –55 | 150 | °C |
| Operating junction temperature, TJ | | 150 | °C |
| Storage temperature, Tstg | –65 | 150 | °C |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause
permanent damage to the device. These are stress ratings only, and functional operation of
the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions
for extended periods may affect device reliability.
(2) Input pins are diode-clamped to the power-supply rails. Input signals that may swing more than 0.5 V beyond the supply rails must be current limited to 10 mA or less.
(3) Short-circuit to ground, one amplifier per package.
(4) Differential input voltages greater than 0.5 V applied continuously can result in a
shift to the input offset voltage and quiescent current above the maximum specifications
of these parameters. The magnitude of this effect increases as the ambient operating
temperature rises.