ZHCSA20C October 2011 – June 2019 LMR10510
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 說明（續）
- 6 Pin Configuration and Functions
- 7 Specifications
- 8 Detailed Description
- 9 Application and Implementation
- 10Layout
- 11器件和文檔支持
- 12機械、封裝和可訂購信息
6 Pin Configuration and Functions
DBV Package
5-Pin SOT-23
Top View
NGG Package
6-Pin WSON
Top View
Pin Description: 5-Pin SOT-23
| PIN | DESCRIPTION | |
|---|---|---|
| NO. | NAME | |
| 1 | SW | Switch node. Connect to the inductor and catch diode. |
| 2 | GND | Signal and power ground pin. Place the bottom resistor of the feedback network as close as possible to this pin. |
| 3 | FB | Feedback pin. Connect to external resistor divider to set output voltage. |
| 4 | EN | Enable control input. Logic high enables operation. Do not allow this pin to float or be greater than VIN + 0.3V. |
| 5 | VIN | Input supply voltage. |
Pin Descriptions 6-Pin WSON
| PIN | DESCRIPTION | |
|---|---|---|
| NO. | NAME | |
| 1 | FB | Feedback pin. Connect to external resistor divider to set output voltage. |
| 2 | GND | Signal and power ground pin. Place the bottom resistor of the feedback network as close as possible to this pin. |
| 3 | SW | Switch node. Connect to the inductor and catch diode. |
| 4 | VIND | Power Input supply. |
| 5 | VINA | Control circuitry supply voltage. Connect VINA to VIND on PC board. |
| 6 | EN | Enable control input. Logic high enables operation. Do not allow this pin to float or be greater than VINA + 0.3V. |
| DAP | Die Attach Pad | Connect to system ground for low thermal impedance, but it cannot be used as a primary GND connection. |