ZHCSP67A October 2021 – January 2022 LMK1D2106 , LMK1D2108
PRODUCTION DATA
For reliability and performance reasons, the die temperature must be limited to a maximum of 135°C.
The device package has an exposed pad that provides the primary heat removal path to the printed circuit board (PCB). To maximize the heat dissipation from the package, a thermal landing pattern including multiple vias to a ground plane must be incorporated into the PCB within the footprint of the package. The thermal pad must be soldered down to ensure adequate heat conduction to of the package. Figure 11-1 and Figure 11-2 show the recommended top layer and via patterns for the 40-pin package (LMK1D2106).