ZHCSJQ0A may 2019 – july 2023 LM5108
PRODUCTION DATA
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| SUPPLY CURRENTS | ||||||
| IDD | VDD quiescent current | VLI = VHI = 0 | 0.28 | 0.29 | mA | |
| IDDO | VDD operating current | f = 500 kHz | 2.3 | 2.4 | mA | |
| IHB | HB quiescent current | VLI = VHI = 0 V | 0.13 | 0.14 | mA | |
| IHBO | HB operating current | f = 500 kHz | 2.5 | 2.8 | mA | |
| ILK | Leakage current | VHS = VHB = 110 V | 2.0 | μA | ||
| IDD_DIS | IDD when driver is disabled | VEN = 0 | 7.0 | μA | ||
| INPUT | ||||||
| VHIT | Input rising threshold | 2.3 | V | |||
| VLIT | Input falling threshold | 1.0 | V | |||
| VIHYS | Input voltage Hysteresis | 0.7 | V | |||
| RIN | Input pulldown resistance | 250 | k? | |||
| ENABLE | ||||||
| VEN | Voltage threshold on EN pin to enable the driver | 1.65 | V | |||
| VDIS | Voltage threshold on EN pin to disable the driver | 1.0 | V | |||
| VENHYS | Enable pin hysteresis | 0.12 | V | |||
| REN | EN pin internal pull-down resistor | 250 | k? | |||
| UNDERVOLTAGE LOCKOUT PROTECTION (UVLO) | ||||||
| VDDR | VDD rising threshold | 4.8 | 5.0 | 5.2 | V | |
| VDDF | VDD falling threshold | 4.3 | 4.5 | 4.8 | V | |
| VDDHYS | VDD threshold hysteresis | 0.5 | V | |||
| VHBR | HB rising threshold with respect to HS pin | 3.4 | 3.7 | 4.1 | V | |
| VHBF | HB falling threshold with respect to HS pin | 3.1 | 3.4 | 3.8 | V | |
| VHBHYS | HB threshold hysteresis | 0.3 | V | |||
| BOOTSTRAP DIODE | ||||||
| VF | Low-current forward voltage | IVDD-HB = 100 μA | 0.55 | V | ||
| VFI | High-current forward voltage | IVDD-HB = 80 mA | 0.9 | V | ||
| RD | Dynamic resistance, ΔVF/ΔI | IVDD-HB = 100 mA and 80 mA | 2.0 | ? | ||
| LO GATE DRIVER | ||||||
| VLOL | Low level output voltage | ILO = 100 mA | 0.13 | V | ||
| VLOH | High level output voltage | ILO = -100 mA, VLOH = VDD – VLO | 0.4 | V | ||
| Peak pullup current | VLO = 0 V | 1.6 | A | |||
| Peak pulldown current | VLO = 12 V | 2.6 | A | |||
| HO GATE DRIVER | ||||||
| VHOL | Low level output voltage | IHO = 100 mA | 0.13 | V | ||
| VHOH | High level output voltage | IHO = –100 mA, VHOH = VHB- VHO | 0.4 | |||
| Peak pullup current | VHO = 0 V | 1.6 | A | |||
| Peak pulldown current | VHO = 12 V | 2.6 | A | |||