精品无码成人网站久久久久久,亚洲精品一级黄片,精品国际久久久久999波多野

ZHCSJ12Z October 1979 – May 2025 LM139 , LM139A , LM239 , LM239A , LM2901 , LM2901AV , LM2901B , LM2901V , LM339 , LM339A , LM339B

PRODMIX

封裝選項

請參考 PDF 數據表獲取器件具體的封裝圖。

機械數據 (封裝 | 引腳)

D|14
PW|14

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

6.11 Electrical Characteristics for LM2901, LM2901V and LM2901AV

at specified free-air temperature, V_CC = 5V (unless otherwise noted)

PARAMETER		TEST CONDITIONS⁽¹⁾		T_A⁽²⁾	LM2901			UNIT
PARAMETER		TEST CONDITIONS⁽¹⁾		T_A⁽²⁾	MIN	TYP	MAX	UNIT
V_IO	Input offset voltage	V_IC = V_ICR min, V_O = 1.4V, V_CC = 5V to MAX⁽³⁾	Non-A devices	25°C		2	7	mV
			Non-A devices	Full range			15
			A-suffix devices	25°C		1	2
			A-suffix devices	Full range			4
I_IO	Input offset current	V_O = 1.4V		25°C		5	50	nA
I_IO	Input offset current	V_O = 1.4V		Full range			200	nA
I_IB	Input bias current	V_O = 1.4V		25°C		–25	–250	nA
I_IB	Input bias current	V_O = 1.4V		Full range			–500	nA
V_ICR	Common-mode input-voltage range⁽⁴⁾			25°C	0 to V_CC – 1.5			V
V_ICR	Common-mode input-voltage range⁽⁴⁾			Full range	0 to V_CC – 2			V
A_VD	Large-signal differential-voltage amplification	V_CC = 15V, V_O = 1.4V to 11.4V, R_L ≥ 15k? to V_CC		25°C	25	100		V/mV
I_OH	High-level output current	V_ID = 1V	V_OH = 5V	25°C		0.1	50	nA
I_OH	High-level output current	V_ID = 1V	V_OH = V_CC MAX⁽³⁾	Full range			1	μA
V_OL	Low-level output voltage	V_ID = –1V, I_OL = 4mA	Non-V devices	25°C		150	500	mV
			V-suffix devices	25°C		150	400
			All devices	Full range			700
I_OL	Low-level output current	V_ID = –1V,	V_OL = 1.5V	25°C	6	16		mA
I_CC	Supply current (four comparators)	V_O = 2.5V, No load	V_CC = 5V	25°C		0.8	2	mA
I_CC	Supply current (four comparators)	V_O = 2.5V, No load	V_CC = MAX⁽³⁾	25°C		1	2.5	mA

(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(2) Full range (MIN to MAX) for LM2901 is –40°C to +125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(3) V_CC MAX = 30V for non-V devices, and 32V for V-suffix devices

(4) The voltage at either input or common-mode must not be allowed to go negative by more than 0.3V. The upper end of the common-mode voltage range is V_CC+ – 1.5V; however, one input can exceed V_CC, and the comparator provides a proper output state as long as the other input remains in the common-mode range. Either or both inputs can go to V_CC MAX without damage.