ZHCSD34B November   2014  – August 2019 DS90UB949-Q1

PRODUCTION DATA.  

1. 1 特性
2. 2 應(yīng)用
3. 3 說明
   1.     Device Images
      1.      應(yīng)用圖表
4. 4 修訂歷史記錄
5. 5 Pin Configuration and Functions
   1.     Pin Functions
6. 6 Specifications
   1. 6.1  Absolute Maximum Ratings
   2. 6.2  ESD Ratings
   3. 6.3  Recommended Operating Conditions
   4. 6.4  Thermal Information
   5. 6.5  DC Electrical Characteristics
   6. 6.6  AC Electrical Characteristics
   7. 6.7  DC And AC Serial Control Bus Characteristics
   8. 6.8  Recommended Timing for the Serial Control Bus
   9. 6.9  Timing Diagrams
   10. 6.10 Typical Characteristics
7. 7 Detailed Description
   1. 7.1 Overview
   2. 7.2 Functional Block Diagram
   3. 7.3 Feature Description
      1. 7.3.1  High-Definition Multimedia Interface (HDMI)
         1. 7.3.1.1 HDMI Receive Controller
      2. 7.3.2  Transition Minimized Differential Signaling
      3. 7.3.3  Enhanced Display Data Channel
      4. 7.3.4  Extended Display Identification Data (EDID)
         1. 7.3.4.1 External Local EDID (EEPROM)
         2. 7.3.4.2 Internal EDID (SRAM)
         3. 7.3.4.3 External Remote EDID
         4. 7.3.4.4 Internal Pre-Programmed EDID
      5. 7.3.5  Consumer Electronics Control (CEC)
      6. 7.3.6  +5-V Power Signal
      7. 7.3.7  Hot Plug Detect (HPD)
      8. 7.3.8  High-Speed Forward Channel Data Transfer
      9. 7.3.9  Back Channel Data Transfer
      10. 7.3.10 FPD-Link III Port Register Access
      11. 7.3.11 Power Down (PDB)
      12. 7.3.12 Serial Link Fault Detect
      13. 7.3.13 Interrupt Pin (INTB)
      14. 7.3.14 Remote Interrupt Pin (REM_INTB)
      15. 7.3.15 General-Purpose I/O
          1. 7.3.15.1 GPIO[3:0] and D_GPIO[3:0] Configuration
          2. 7.3.15.2 Back Channel Configuration
          3. 7.3.15.3 GPIO_REG[8:5] Configuration
      16. 7.3.16 SPI Communication
          1. 7.3.16.1 SPI Mode Configuration
          2. 7.3.16.2 Forward Channel SPI Operation
          3. 7.3.16.3 Reverse Channel SPI Operation
      17. 7.3.17 Backward Compatibility
      18. 7.3.18 Audio Modes
          1. 7.3.18.1 HDMI Audio
          2. 7.3.18.2 DVI I2S Audio Interface
             1. 7.3.18.2.1 I2S Transport Modes
             2. 7.3.18.2.2 I2S Repeater
          3. 7.3.18.3 AUX Audio Channel
          4. 7.3.18.4 TDM Audio Interface
      19. 7.3.19 Built-In Self Test (BIST)
          1. 7.3.19.1 BIST Configuration And Status
          2. 7.3.19.2 Forward Channel and Back Channel Error Checking
      20. 7.3.20 Internal Pattern Generation
          1. 7.3.20.1 Pattern Options
          2. 7.3.20.2 Color Modes
          3. 7.3.20.3 Video Timing Modes
          4. 7.3.20.4 External Timing
          5. 7.3.20.5 Pattern Inversion
          6. 7.3.20.6 Auto Scrolling
          7. 7.3.20.7 Additional Features
      21. 7.3.21 Spread Spectrum Clock Tolerance
   4. 7.4 Device Functional Modes
      1. 7.4.1 Mode Select Configuration Settings (MODE_SEL[1:0])
      2. 7.4.2 FPD-Link III Modes of Operation
         1. 7.4.2.1 Single Link Operation
         2. 7.4.2.2 Dual Link Operation
         3. 7.4.2.3 Replicate Mode
         4. 7.4.2.4 Auto-Detection of FPD-Link III Modes
      3. 7.4.3 Frequency Detection Circuit May Reset the FPD-Link III PLL During a Temperature Ramp
   5. 7.5 Programming
      1. 7.5.1 Serial Control Bus
      2. 7.5.2 Multi-Master Arbitration Support
      3. 7.5.3 I2C Restrictions on Multi-Master Operation
      4. 7.5.4 Multi-Master Access to Device Registers for Newer FPD-Link III Devices
      5. 7.5.5 Multi-Master Access to Device Registers for Older FPD-Link III Devices
      6. 7.5.6 Restrictions on Control Channel Direction for Multi-Master Operation
   6. 7.6 Register Maps
8. 8 Application and Implementation
   1. 8.1 Applications Information
   2. 8.2 Typical Applications
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
         1. 8.2.2.1 High-Speed Interconnect Guidelines
      3. 8.2.3 Application Curves
         1. 8.2.3.1 Application Performance Plots
9. 9 Power Supply Recommendations
   1. 9.1 Power-Up Requirements and PDB Pin
10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
11. 11器件和文檔支持
    1. 11.1 文檔支持
       1. 11.1.1 相關(guān)文檔
    2. 11.2 接收文檔更新通知
    3. 11.3 商標(biāo)
    4. 11.4 靜電放電警告
    5. 11.5 Glossary
12. 12機械、封裝和可訂購信息