| 7-6 |
RSV |
R/W |
0h |
Reserved |
| 5-4 |
LANE_COUNT |
R/W |
0h |
Setup number of data lanes for the CSI ports.
00/01: 4 data lanes
10: 2 data lanes
11: 1 data lane |
| 3 |
ULPM |
R/W |
0h |
When set, put the data lanes in ultra-low power mode (LP00) by sending out a LP signalling sequence. |
| 2 |
ULPS |
R/W |
0h |
When set with ULPM, put the clock lane into ultra-low power mode. No effect if ULPM is not set. |
| 1 |
CONTS_CLK |
R/W |
0h |
When set, keep the clock lane running (in HS mode) during line blank (DE=0) and frame blank (VS not active). |
| 0 |
CSI_DIS |
R/W |
0h |
When set, disable the CSI state machine. This functions as a soft reset. |