| 7 |
GPIO8_OUTPUT
_VALUE |
R/W |
0h |
Local GPIO Output Value.
This value is output on the GPIO pin when the GPIO function is enabled, the local GPIO direction is Output, and remote GPIO control is disabled. |
| 6 |
GPIO8_REMOTE
_ENABLE |
R/W |
0h |
Remote GPIO Control.
1: Enable GPIO control from remote Serializer. The GPIO pin will be an output, and the value is received from the remote Serializer.
0: Disable GPIO control from remote Serializer. |
| 5 |
GPIO8_DIR |
R/W |
0h |
The GPIO DIR configures the pad in input direction or output direction for functional mode or GPIO mode.
00: Functional mode; output
10: Tri-state
01: GPIO mode; output
11: GPIO mode; input |
| 4 |
GPIO8_EN |
R/W |
0h |
The GPIO EN configures the pad in input direction or output direction for functional mode or GPIO mode.
00: Functional mode; output
10: Tri-state
01: GPIO mode; output
11: GPIO mode; input |
| 3 |
GPIO7_OUTPUT
_VALUE |
R/W |
0h |
Local GPIO Output Value.
This value is output on the GPIO pin when the GPIO function is enabled, the local GPIO direction is Output, and remote GPIO control is disabled. |
| 2 |
GPIO7_REMOTE
_ENABLE |
R/W |
0h |
Remote GPIO Control.
1: Enable GPIO control from remote Serializer. The GPIO pin will be an output, and the value is received from the remote Serializer.
0: Disable GPIO control from remote Serializer. |
| 1 |
GPIO7_DIR |
R/W |
0h |
The GPIO DIR configures the pad in input direction or output direction for functional mode or GPIO mode.
00: Functional mode; output
10: Tri-state
01: GPIO mode; output
11: GPIO mode; input |
| 0 |
RESERVED |
R/W |
0h |
Reserved |