4 修訂歷史記錄

Changes from F Revision (March 2017) to G Revision

• Changed 將齊納二極管限制的最大電源電壓從 15V 更改為 V_ZENERGo
• Deleted virtual from the operating junction temperature and changed its maximum value from 125°C to 150°C in the Absolute Maximum Ratings tableGo
• Added the temperature range for the parameters in the Recommended Operating Conditions table, add the V_S parameter, and updated the V_IN and I_Q parametersGo
• Deleted the solenoid inductance parameter from the Recommended Operating Conditions tableGo
• Deleted the I_VIN test condition from the gate drive voltage parameter in the Electrical Characteristics tableGo
• Changed the parameter names for V_PEAK and V_HOLD in the Electrical Characteristics tableGo
• Added the input pulldown resistance parameter in the Electrical Characteristics tableGo
• Added the DRV110 Current Control with Varying OUT Duty Cycle image to the PWM Current Control sectionGo
• Changed the R_PEAK value for I_PEAK = 450 mA from 50 kΩ to 55 kΩ in the Configuring Peak and Hold Currents sectionGo
• Changed the Configuring Peak and Hold Currents section and PEAK and HOLD Mode V_REF Settings image (which is now named I_PEAK and I_HOLD settings for R_SENSE = 1 ΩGo
• Changed the Voltage Supply and Integrated Zener Diode section. Added the V_ZENER Value table and changed the R_S equation to specify calculations for R_S,max and R_S,minGo
• Deleted the Default Configuration schematicGo
• Added the Current Limiting Resistor Selection and Passives Selection sections in the Detailed Design ProcedureGo
• Changed the value of R_PEAK from 303 kΩ to 400 kΩ in the Application CurveGo

Changes from E Revision (November 2016) to F Revision

• Changed the Functional Block DiagramGo
• Changed the I_HOLD equation Go
• Changed the Shutdown section to provide a description of the STATUS pin. Go

Changes from D Revision (June 2016) to E Revision

• Changed 文檔標題，在其中添加了交流電壓和直流電壓值Go
• 修訂了特性 和應用列表Go
• Changed 首頁圖形至原理圖 Go
• Revised table notes for Recommended Operating Conditions tableGo

Changes from C Revision (April 2016) to D Revision

• Changed 文檔標題Go
• Changed 160 kΩ in the f_PWM equation to 66.67 kΩGo
• Added 接收文檔更新通知 部分Go

Changes from B Revision (July 2015) to C Revision

• Changed one test condition (R_OSC = 50 kΩ to 160 kΩ) and the maximum value for the Externally set PWM clock frequency (60 to 25) in the Electrical Characteristics table Go
• Changed the PWM Clock Frequency Setting graphGo

Changes from A Revision (January 2013) to B Revision

• Added 添加了 ESD 額定值 表、特性 說明部分、器件功能模式、應用和實施部分、電源相關建議部分、布局部分、器件和文檔支持部分以及機械、封裝和可訂購信息部分Go