ZHCSTF3I June 2007 – August 2024 CDCE913 , CDCEL913
PRODUCTION DATA
- 1
- 1 特性
- 2 應用
- 3 說明
- 4 Pin Configuration and Functions
-
5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Thermal Information
- 5.5 Electrical Characteristics
- 5.6 EEPROM Specification
- 5.7 Timing Requirements: CLK_IN
- 5.8 Timing Requirements: SDA/SCL #GUID-DE171716-D3A0-4375-A25C-58C636304087/SCAS849414
- 5.9 Typical Characteristics
- 6 Parameter Measurement Information
- 7 Detailed Description
- 8 Application and Implementation
- 9 Register Maps
- 10Device and Documentation Support
- 11Revision History
- 12Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
- PW|14
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
7.5 Programming
Table 7-8 Command Code Definition
| BIT | DESCRIPTION |
|---|---|
| 7 | 0 = Block Read or Block Write operation 1 = Byte Read or Byte Write operation |
| (6:0) | Byte offset for Byte Read, Block Read, Byte Write, and Block Write operations |
Figure 7-3 Generic Programming Sequence
Figure 7-4 Byte Write Protocol
Figure 7-5 Byte Read Protocol
A. Data byte
0 bits [7:0] is reserved for Revision Code and
Vendor Identification. Also, Data byte 0 is used
for internal test purpose and must not be
overwritten.
Figure 7-6 Block Write Protocol
Figure 7-7 Block Read Protocol
Figure 7-8 Timing Diagram for SDA/SCL Serial Control Interface