主頁 電源管理 AC/DC 和 DC/DC 轉換器（集成 FET）

UCC39411

正在供貨

1.125V 閾值低功耗同步升壓轉換器

可提供此產品的更新版本

功能與比較器件相同，但引腳排列有所不同
TPS61070 正在供貨 采用 ThinSOT-23 封裝且具有省電模式的可調節 600mA 開關、1200kHz 升壓轉換器 Lower quiescent current, wider operating range, smaller solution size

產品詳情

Rating Catalog Topology Boost Switch current limit (typ) (A) 0.55 Vin (max) (V) 5.5 Vin (min) (V) 1 Vout (max) (V) 5 Vout (min) (V) 2 Features Synchronous rectification Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 500 Operating temperature range (°C) -40 to 125 Iq (typ) (μA) 48 Duty cycle (max) (%) 100 Type Converter
Rating Catalog Topology Boost Switch current limit (typ) (A) 0.55 Vin (max) (V) 5.5 Vin (min) (V) 1 Vout (max) (V) 5 Vout (min) (V) 2 Features Synchronous rectification Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 500 Operating temperature range (°C) -40 to 125 Iq (typ) (μA) 48 Duty cycle (max) (%) 100 Type Converter
SOIC (D) 8 29.4 mm2 4.9 x 6 TSSOP (PW) 8 19.2 mm2 3 x 6.4
  • 1 V Input Voltage Operation Start-Up Ensured Under Full Load on Main Output, and Operation Down to 0.5 V
  • 200 mW Output Power at Battery Voltages as Low as 0.8 V
  • Secondary 7 V Supply from a Single Inductor
  • Output Fully Disconnected in Shutdown
  • Adaptive Current Mode Control for Optimum Efficiency
  • High Efficiency Over Wide Operating Range
  • 6 μA Shutdown Supply Current
  • Output Reset Function with Programmable Reset Period
  • 1 V Input Voltage Operation Start-Up Ensured Under Full Load on Main Output, and Operation Down to 0.5 V
  • 200 mW Output Power at Battery Voltages as Low as 0.8 V
  • Secondary 7 V Supply from a Single Inductor
  • Output Fully Disconnected in Shutdown
  • Adaptive Current Mode Control for Optimum Efficiency
  • High Efficiency Over Wide Operating Range
  • 6 μA Shutdown Supply Current
  • Output Reset Function with Programmable Reset Period

The UCCx9411 family of low-input voltage, single-inductor-boost converters is optimized to operate from a single or dual alkaline cell, and steps up to a 3.3 V, 5 V, or adjustable output at 200 mW. The UCCx9411 family also provides an auxiliary 7 V output, primarily for the gate-drive supply, which can be used for applications requiring an auxiliary output, such as 5 V, by linear regulating. The primary output starts up under full load at input voltages typically as low as 0.8 V with a ensured max of 1 V, and operates down to 0.5 V once the converter is operating, thereby maximizing battery usage.

The UCCx9411 family is designed to accommodate demanding applications such as pagers and cell phones that require high efficiency over a wide operating range of several milliwatts to a couple of hundred milli-watts. High efficiency at low output current is achieved by optimizing switching and conduction losses with a low total quiescent current. At higher output current, the 0.5 synchronous rectifier along with continuous mode conduction provide high power efficiency. The wide input voltage range of the UCCx9411 family can accommodate other power sources such as NiCd and NiMH.

The UCCx9411 family also provides shutdown control. Packages available are the 8-pin SOIC (D) and 8-pin TSSOP (PW) to optimize board space.

The UCCx9411 family of low-input voltage, single-inductor-boost converters is optimized to operate from a single or dual alkaline cell, and steps up to a 3.3 V, 5 V, or adjustable output at 200 mW. The UCCx9411 family also provides an auxiliary 7 V output, primarily for the gate-drive supply, which can be used for applications requiring an auxiliary output, such as 5 V, by linear regulating. The primary output starts up under full load at input voltages typically as low as 0.8 V with a ensured max of 1 V, and operates down to 0.5 V once the converter is operating, thereby maximizing battery usage.

The UCCx9411 family is designed to accommodate demanding applications such as pagers and cell phones that require high efficiency over a wide operating range of several milliwatts to a couple of hundred milli-watts. High efficiency at low output current is achieved by optimizing switching and conduction losses with a low total quiescent current. At higher output current, the 0.5 synchronous rectifier along with continuous mode conduction provide high power efficiency. The wide input voltage range of the UCCx9411 family can accommodate other power sources such as NiCd and NiMH.

The UCCx9411 family also provides shutdown control. Packages available are the 8-pin SOIC (D) and 8-pin TSSOP (PW) to optimize board space.
下載

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 1
類型 標題 下載最新的英語版本 日期
* 數據表 Low Power Synchronous Boost Converter 數據表 (Rev. E) 2005年 7月 20日

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

支持和培訓