UCC28061
- NATURAL INTERLEAVING FEATURES
- Easy Phase Management Facilitates Compliance to Light-Load Efficient Standards
- FailSafe OVP with Dual Paths Prevents Output Over-Voltage Conditions Caused by Voltage-Sensing Failures
- Sensorless Current Shaping Simplifies Board Layout and Improves Efficiency
- Inrush Safe Current Limiting:
- Prevents MOSFET conduction during inrush
- Eliminates reverse recovery events in output rectifiers
- SYSTEM FEATURES
- Improved Audible Noise Performance
- Soft Start on Overvoltage
- Integrated Brownout
- Improved Efficiency and Design Flexibility over Traditional, Single-Phase Continuous Conduction Mode (CCM)
- Input Filter and Output Capacitor Current Cancellation:
- Reduced current ripple for higher system reliability and smaller bulk capacitor
- Reduced EMI filter size
- Enables Use of Low-Cost Diodes without Extensive Snubber Circuitry
- Improved Light-Load Efficiency
- Improved Transient Response
- Complete System-Level Protection
- 1-A Source/1.8-A Sink Gate Drivers
- APPLICATIONS
- 100-W to 800-W Power Supplies
- Gaming
- D to A Set Top Boxes
- Adapters
- LCD, Plasma and DLP TVs
- Home Audio Systems
DLP is a trademark of Texas Instruments.
Natural Interleaving is a trademark of Texas Instuments.
Optimized for consumer applications concerned with audible noise elimination, this solution extends the advantages of transition modehigh efficiency with low-cost componentsto higher power ratings than previously possible. By utilizing a Natural Interleaving technique, both channels operate as masters (that is, there is no slave channel) synchronized to the same frequency. This approach delivers inherently strong matching, faster responses, and ensures that each channel operates in transition mode.
Complete system-level protections feature input brownout, output over-voltage, open-loop, overload, soft-start, phase-fail detection, and thermal shutdown. The additional FailSafe over-voltage protection (OVP) feature protects against shorts to an intermediate voltage that, if undetected, could lead to catastrophic device failure.
您可能感興趣的相似產品
功能優于所比較器件的普遍直接替代產品
技術文檔
| 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 數據表 | Natural Interleaving Transition-Mode PFC Controller for 80 PLUS and ENERGY STAR 數據表 (Rev. A) | 2009年 4月 29日 | |||
| 應用手冊 | UCC2806x PCB Layout Guideline for PFC | 2019年 4月 29日 | ||||
| 白皮書 | An Interleaved PFC Preregulator for High-Power Converters | 2015年 4月 28日 | ||||
| 用戶指南 | A 600-W Input, Isolated PFC Power Supply for AVR Amplifiers. (Rev. C) | 2012年 9月 20日 | ||||
| 應用手冊 | 采用外部電路改善UCC2806x的軟啟動性能 | 英語版 | 2012年 1月 12日 | |||
| 應用手冊 | A 300-W, Universal Input, Isolated PFC Power Supply for LCD TV Applications (Rev. B) | 2009年 3月 19日 | ||||
| 用戶指南 | UCC28061 300W PFC Pre-Regulator Evaluation Module | 2008年 5月 6日 |
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
UCC28061EVM — UCC28061 300W PFC 前置穩壓器評估模塊
UCC28061 是一款雙相、轉換模式功率因數校正 (PFC) 前置穩壓器。UCC28061EVM 是一款具有 390V、300W 直流輸出的評估模塊 (EVM),它在 85 VRMS 到 265 VRMS 的通用輸入電壓范圍內工作,并提供功率因數校正功能。該前置穩壓器使用 UCC28061 PFC 交錯控制器使輸入電流波成形,以提供功率因數校正功能。此器件采用 TI 的 Natural Interleaving™ 技術來交錯升壓相位。本用戶指南提供了單面印刷電路板應用的原理圖、材料清單、裝配圖以及評估典型 PFC 應用中的 UCC28060 所需的測試設置信息。
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| SOIC (D) | 16 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。